[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] Problem with TPI and "serbb" mode
From: |
Hannes Weisbach |
Subject: |
Re: [avrdude-dev] Problem with TPI and "serbb" mode |
Date: |
Wed, 20 Mar 2019 09:55:25 +0100 |
I don’t believe I’ve ever published my TPI for FTDI MPSSE. So, if no-one else
has implemented this(I did not follow avrdude development closely), I believe
avrdude can't do MPSSE+TPI.
--
Best regards,
Hannes
> Am 20.03.2019 um 08:31 schrieb Joerg Wunsch <address@hidden>:
>
> As Wayne Holder wrote:
>
>> I'm trying to use AVRDUDE on macOS 0.14.2 to communicate with an ATTiny10
>> that's connected an FTDI breakout board like this:
>
> Curious: for an FTDI, why use serbb? It's among the slowest possible
> options. Don't you have the possibility to use FTDI's MPSSE? All it
> requires is one of the supported chips (see the FTDI website), and
> the presence of libftdi (which is opensource) on your system.
>
> Since all the bitbanging is then handled inside the FTDI chip, this
> is going to be way faster than serbb which has to complicatedly
> transfer full USB packets for each single bit change.
> --
> cheers, Joerg .-.-. --... ...-- -.. . DL8DTL
>
> http://www.sax.de/~joerg/
> Never trust an operating system you don't have sources for. ;-)
>
> _______________________________________________
> avrdude-dev mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avrdude-dev
Re: [avrdude-dev] Problem with TPI and "serbb" mode (giving up), Wayne Holder, 2019/03/24