Re: [avrdude-dev] avrftdi TPI support

[Joerg Wunsch]

As Joerg Wunsch wrote:

> Other AVRs require the HV on /RESET to be in the range of 11.5 through
> 12.5 V.  You have to measure the current consumption, but after all,
> this is a MOS input only, so I wouldn't expect it to draw much beyond
> of about 1 µA.

Actually, it's more.  I measured about 550 µA @ 12 V, but with a
few 100 mV more, it could be about 2 mA already.

-- 
cheers, Joerg               .-.-.   --... ...--   -.. .  DL8DTL

http://www.sax.de/~joerg/
Never trust an operating system you don't have sources for. ;-)