[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] avrdude5.5 + stk500: ***failed
From: |
Theodore D. Sternberg |
Subject: |
[avrdude-dev] avrdude5.5 + stk500: ***failed |
Date: |
Tue, 25 Dec 2007 14:06:17 -0800 (PST) |
I can read but not write the flash ROM. I am using the avrdude.conf
file that's distributed with avrdude 5.5; I haven't made any changes.
I have a binary file (should it even matter what's in it??) called
blinky and here's what happens:
$ avrdude -P/dev/ttyS1 -p8515 -v -cstk500v2 -F -U flash:w:blinky
avrdude: Version 5.5, compiled on Dec 25 2007 at 12:57:01
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is
"/users/ted/usr/avrdude/etc/avrdude.conf"
User configuration file is "/users/ted/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : /dev/ttyS1
Using Programmer : stk500v2
AVR Part : AT90S8515
Chip Erase delay : 20000 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
eeprom 4 12 128 0 no 512 0 0 4000
9000 0x80 0x7f
flash 4 12 128 0 no 8192 0 0 4000
9000 0x7f 0x7f
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
fuse 0 0 0 0 no 1 0 0 0
0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000
9000 0x00 0x00
Programmer Type : STK500V2
Description : Atmel STK500 Version 2.x firmware
Programmer Model: STK500
Hardware Version: 2
Firmware Version: 2.10
Topcard : Unknown
Vtarget : 5.1 V
Varef : 5.0 V
Oscillator : 3.686 MHz
SCK period : 10.9 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9306
avrdude: Expected signature for AT90S8515 is 1E 93 01
avrdude: safemode: Fuse reading not support by programmer.
Safemode disabled.
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "/users/ted/usr/local/src/AVR/blinky"
avrdude: input file /users/ted/usr/local/src/AVR/blinky auto detected as raw
binary
avrdude: writing flash (5586 bytes):
Writing | ***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
***failed;
[...and on and on...]
- [avrdude-dev] avrdude5.5 + stk500: ***failed,
Theodore D. Sternberg <=