[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefun
From: |
Daniel Williamson |
Subject: |
FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction) |
Date: |
Thu, 5 Feb 2004 15:27:20 -0000 |
Hi I was using 4.3.0 on a mega 128 using the pony-stk200 programmer.
It programmed the device in 17s.
When I used the exe from the VC++ package I got the following errors.
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9702
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be
performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "5003.hex"
avrdude: input file 5003.hex auto detected as Intel Hex
avrdude: writing flash (41442 bytes):
Writing | ################################################## | 100% -43.65s
avrdude: 41442 bytes of flash written
avrdude: verifying flash memory against 5003.hex:
avrdude: load data flash data from input file 5003.hex:
avrdude: input file 5003.hex auto detected as Intel Hex
avrdude: input file 5003.hex contains 41442 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 16.10s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0200
0x00 != 0xff
avrdude: verification error; content mismatch
avrdude done. Thank you.
bye
G:\Ms60\Soft\S4-5003\DEV>pgm
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9702
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be
performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "5003.hex"
avrdude: input file 5003.hex auto detected as Intel Hex
avrdude: writing flash (41442 bytes):
Writing | ################################################## | 100% 16.36s
avrdude: 41442 bytes of flash written
avrdude: verifying flash memory against 5003.hex:
avrdude: load data flash data from input file 5003.hex:
avrdude: input file 5003.hex auto detected as Intel Hex
avrdude: input file 5003.hex contains 41442 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% -43.90s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0200
0x00 != 0xff
avrdude: verification error; content mismatch
avrdude done. Thank you.
bye
I also programmed a mega 32 which also failed with verification errors.
Dan.
- FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction),
Daniel Williamson <=
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), Jan-Hinnerk Reichert, 2004/02/05
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), Jan-Hinnerk Reichert, 2004/02/05
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), E. Weddington, 2004/02/06
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), Jan-Hinnerk Reichert, 2004/02/08
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), E. Weddington, 2004/02/09
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), Jan-Hinnerk Reichert, 2004/02/09
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), E. Weddington, 2004/02/09
- Re: FW: [avrdude-dev] Windows port (was: Butterfly proposal: Exit upgradefunction), Joerg Wunsch, 2004/02/11