[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Programming Flash without Erase the flash first in Wi
From: |
Brian Dean |
Subject: |
Re: [avr-gcc-list] Programming Flash without Erase the flash first in WinAVR |
Date: |
Thu, 27 Oct 2005 15:33:38 -0400 |
User-agent: |
Mutt/1.5.9i |
On Thu, Oct 27, 2005 at 07:06:52AM +0200, Joerg Wunsch wrote:
> When using avrdude, either use two -U flash:w:... options in the
> same command, or specify -D in the second command; that will
> suppress the chip erase.
Also, using a second -U for the other one should work as well, i.e.:
avrdude ... -V -U flash:w:application.hex -U flash:w:bootloader.hex
-Brian
--
Brian Dean
ATmega128 based MAVRIC controllers
http://www.bdmicro.com/