[avr-chat] avrdude: a little mistake at the display of fusebytes

[Andreas Graebe]

Good evening,

i propably found a little mistake in avrdude: in the resume at the end,
the fusebytes are displayed as a resume. When you set the parameter -v,
the fusebytes are also displayed separately. As you can see here, the
order of fusebytes is different.

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
 avrdude: Device signature = 0x1e9702
 avrdude: safemode: lfuse reads as 7F
 avrdude: safemode: hfuse reads as C7
 avrdude: safemode: efuse reads as FF

 avrdude: safemode: lfuse reads as 7F
 avrdude: safemode: hfuse reads as C7
 avrdude: safemode: efuse reads as FF
 avrdude: safemode: Fuses OK (H:FF, E:C7, L:7F)

 avrdude done.  Thank you.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The order of the separate displayed fusebytes is right, but in the
resume, H: and E: are changed.

Of course, this is not really a mistake, but a flaw.

-- 
mit freundlichen Grüßen / kind regards

Andreas Graebe