[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Rfid-all] unknown setup error
From: |
Loic Dachary |
Subject: |
Re: [Rfid-all] unknown setup error |
Date: |
Thu, 11 May 2006 00:50:20 +0200 |
andrew [the agent] writes:
> I've tried running t_all with verbosity up (using [-v] [-verbose] &
> [--verbose]), but produced unchanging results.
Read the t_all script, read the sources of rfid/rfid/t_rfid.c
and you'll find the solution (setting verbose static to 1 or 2 or 3
don't remember exactly).
>
> #
> # Test programs work best if a single RFID reader is connected to the
> # machine (either on serial port or thru a USB/Serial adapter) and a
> # single RFID transponder is in the range of the RFID reader.
> #
> # No RFID reader, no RFID transponder : test initialization functions.
> # RFID reader, no RFID transponder : test dialog with RFID reader no
> # involving a RFID transponder.
> # RFID reader, RFID transponder : test everything.
> #
> # Some tests are not reversible (locking a block for instance) and
> # are not run by default. If the DESTRUCTIVE environment variable is
> # set (the value does not matter), these tests will be run.
> #
> #
> # t_rfid
> #
>
> To verify, I only need rfid-3.1.0.tar.gz, correct?
>
> I am greatful for your help, thanks.
> Andrew
--
Loic Dachary, 12 bd Magenta, 75010 Paris. Tel: 33 8 71 18 43 38
http://www.fsffrance.org/ http://www.dachary.org/loic/gpg.txt