qemu-s390x
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 07/12] s390x/pci: enable for load/store intepretation


From: Matthew Rosato
Subject: [PATCH 07/12] s390x/pci: enable for load/store intepretation
Date: Tue, 7 Dec 2021 16:04:20 -0500

Use the associated vfio feature ioctl to enable interpretation for devices
when requested.  As part of this process, we must use the host function
handle rather than a QEMU-generated one -- this is provided as part of the
ioctl payload.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
 hw/s390x/s390-pci-bus.c          | 69 +++++++++++++++++++++++++++++++-
 hw/s390x/s390-pci-inst.c         | 63 ++++++++++++++++++++++++++++-
 hw/s390x/s390-pci-vfio.c         | 55 +++++++++++++++++++++++++
 include/hw/s390x/s390-pci-bus.h  |  1 +
 include/hw/s390x/s390-pci-vfio.h | 15 +++++++
 5 files changed, 201 insertions(+), 2 deletions(-)

diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 01b58ebc70..451bd32d92 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -971,12 +971,57 @@ static void s390_pci_update_subordinate(PCIDevice *dev, 
uint32_t nr)
     }
 }
 
+static int s390_pci_interp_plug(S390pciState *s, S390PCIBusDevice *pbdev)
+{
+    uint32_t idx;
+    int rc;
+
+    rc = s390_pci_probe_interp(pbdev);
+    if (rc) {
+        return rc;
+    }
+
+    rc = s390_pci_update_passthrough_fh(pbdev);
+    if (rc) {
+        return rc;
+    }
+
+    /*
+     * The host device is in an enabled state, but the device must
+     * begin as disabled for the guest so mask off the enable bit
+     * from the passthrough handle.
+     */
+    pbdev->fh &= ~FH_MASK_ENABLE;
+
+    /* Next, see if the idx is already in-use */
+    idx = pbdev->fh & FH_MASK_INDEX;
+    if (pbdev->idx != idx) {
+        if (s390_pci_find_dev_by_idx(s, idx)) {
+            return -EINVAL;
+        }
+        /*
+         * Update the idx entry with the passed through idx
+         * If the relinquised idx is lower than next_idx, use it
+         * to replace next_idx
+         */
+        g_hash_table_remove(s->zpci_table, &pbdev->idx);
+        if (idx < s->next_idx) {
+            s->next_idx = idx;
+        }
+        pbdev->idx = idx;
+        g_hash_table_insert(s->zpci_table, &pbdev->idx, pbdev);
+    }
+
+    return 0;
+}
+
 static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
                               Error **errp)
 {
     S390pciState *s = S390_PCI_HOST_BRIDGE(hotplug_dev);
     PCIDevice *pdev = NULL;
     S390PCIBusDevice *pbdev = NULL;
+    int rc;
 
     if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)) {
         PCIBridge *pb = PCI_BRIDGE(dev);
@@ -1022,12 +1067,33 @@ static void s390_pcihost_plug(HotplugHandler 
*hotplug_dev, DeviceState *dev,
         set_pbdev_info(pbdev);
 
         if (object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
-            pbdev->fh |= FH_SHM_VFIO;
+            /*
+             * By default, interpretation is always requested; if the available
+             * facilities indicate it is not available, fallback to the
+             * intercept model.
+             */
+            if (pbdev->interp && !s390_has_feat(S390_FEAT_ZPCI_INTERP)) {
+                    DPRINTF("zPCI interpretation facilities missing.\n");
+                    pbdev->interp = false;
+                }
+            if (pbdev->interp) {
+                rc = s390_pci_interp_plug(s, pbdev);
+                if (rc) {
+                    error_setg(errp, "zpci interp plug failed: %d", rc);
+                    return;
+                }
+            }
             pbdev->iommu->dma_limit = s390_pci_start_dma_count(s, pbdev);
             /* Fill in CLP information passed via the vfio region */
             s390_pci_get_clp_info(pbdev);
+            if (!pbdev->interp) {
+                /* Do vfio passthrough but intercept for I/O */
+                pbdev->fh |= FH_SHM_VFIO;
+            }
         } else {
             pbdev->fh |= FH_SHM_EMUL;
+            /* Always intercept emulated devices */
+            pbdev->interp = false;
         }
 
         if (s390_pci_msix_init(pbdev)) {
@@ -1360,6 +1426,7 @@ static Property s390_pci_device_properties[] = {
     DEFINE_PROP_UINT16("uid", S390PCIBusDevice, uid, UID_UNDEFINED),
     DEFINE_PROP_S390_PCI_FID("fid", S390PCIBusDevice, fid),
     DEFINE_PROP_STRING("target", S390PCIBusDevice, target),
+    DEFINE_PROP_BOOL("interp", S390PCIBusDevice, interp, true),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 0cef7fbace..ba4017474e 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -18,6 +18,7 @@
 #include "sysemu/hw_accel.h"
 #include "hw/s390x/s390-pci-inst.h"
 #include "hw/s390x/s390-pci-bus.h"
+#include "hw/s390x/s390-pci-vfio.h"
 #include "hw/s390x/tod.h"
 
 #ifndef DEBUG_S390PCI_INST
@@ -156,6 +157,47 @@ out:
     return rc;
 }
 
+static int clp_enable_interp(S390PCIBusDevice *pbdev)
+{
+    int rc;
+
+    rc = s390_pci_set_interp(pbdev, true);
+    if (rc) {
+        DPRINTF("Failed to enable interpretation\n");
+        return rc;
+    }
+    rc = s390_pci_update_passthrough_fh(pbdev);
+    if (rc) {
+        DPRINTF("Failed to update passthrough fh\n");
+        return rc;
+    }
+    if (!(pbdev->fh & FH_MASK_ENABLE)) {
+        DPRINTF("Passthrough handle is not enabled\n");
+        return -EINVAL;
+    }
+
+    return 0;
+}
+
+static int clp_disable_interp(S390PCIBusDevice *pbdev)
+{
+    int rc;
+
+    rc = s390_pci_set_interp(pbdev, false);
+    if (rc) {
+        DPRINTF("Failed to disable interpretation\n");
+        return rc;
+    }
+
+    rc = s390_pci_update_passthrough_fh(pbdev);
+    if (rc) {
+        DPRINTF("Failed to update passthrough fh\n");
+        return rc;
+    }
+
+    return 0;
+}
+
 int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra)
 {
     ClpReqHdr *reqh;
@@ -246,7 +288,19 @@ int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t 
ra)
                 goto out;
             }
 
-            pbdev->fh |= FH_MASK_ENABLE;
+            /*
+             * If interpretation is specified, attempt to enable this now and
+             * update with the host fh
+             */
+            if (pbdev->interp) {
+                if (clp_enable_interp(pbdev)) {
+                    stw_p(&ressetpci->hdr.rsp, CLP_RC_SETPCIFN_ERR);
+                    goto out;
+                }
+            } else {
+                pbdev->fh |= FH_MASK_ENABLE;
+            }
+
             pbdev->state = ZPCI_FS_ENABLED;
             stl_p(&ressetpci->fh, pbdev->fh);
             stw_p(&ressetpci->hdr.rsp, CLP_RC_OK);
@@ -257,6 +311,13 @@ int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t 
ra)
                 goto out;
             }
             device_legacy_reset(DEVICE(pbdev));
+            if (pbdev->interp) {
+                if (clp_disable_interp(pbdev)) {
+                    stw_p(&ressetpci->hdr.rsp, CLP_RC_SETPCIFN_ERR);
+                    goto out;
+                }
+            }
+            /* Mask off the enabled bit for interpreted devices too */
             pbdev->fh &= ~FH_MASK_ENABLE;
             pbdev->state = ZPCI_FS_DISABLED;
             stl_p(&ressetpci->fh, pbdev->fh);
diff --git a/hw/s390x/s390-pci-vfio.c b/hw/s390x/s390-pci-vfio.c
index 6f80a47e29..78093aaac7 100644
--- a/hw/s390x/s390-pci-vfio.c
+++ b/hw/s390x/s390-pci-vfio.c
@@ -97,6 +97,61 @@ void s390_pci_end_dma_count(S390pciState *s, S390PCIDMACount 
*cnt)
     }
 }
 
+int s390_pci_probe_interp(S390PCIBusDevice *pbdev)
+{
+    VFIOPCIDevice *vdev = container_of(pbdev->pdev, VFIOPCIDevice, pdev);
+    struct vfio_device_feature feat = {
+        .argsz = sizeof(struct vfio_device_feature),
+        .flags = VFIO_DEVICE_FEATURE_PROBE + VFIO_DEVICE_FEATURE_ZPCI_INTERP
+    };
+
+    return ioctl(vdev->vbasedev.fd, VFIO_DEVICE_FEATURE, &feat);
+}
+
+int s390_pci_set_interp(S390PCIBusDevice *pbdev, bool enable)
+{
+    VFIOPCIDevice *vdev = container_of(pbdev->pdev, VFIOPCIDevice, pdev);
+    g_autofree struct vfio_device_feature *feat;
+    struct vfio_device_zpci_interp *data;
+    int size;
+
+    size = sizeof(*feat) + sizeof(*data);
+    feat = g_malloc0(size);
+    feat->argsz = size;
+    feat->flags = VFIO_DEVICE_FEATURE_SET + VFIO_DEVICE_FEATURE_ZPCI_INTERP;
+
+    data = (struct vfio_device_zpci_interp *)&feat->data;
+    if (enable) {
+        data->flags = VFIO_DEVICE_ZPCI_FLAG_INTERP;
+    } else {
+        data->flags = 0;
+    }
+
+    return ioctl(vdev->vbasedev.fd, VFIO_DEVICE_FEATURE, feat);
+}
+
+int s390_pci_update_passthrough_fh(S390PCIBusDevice *pbdev)
+{
+    VFIOPCIDevice *vdev = container_of(pbdev->pdev, VFIOPCIDevice, pdev);
+    g_autofree struct vfio_device_feature *feat;
+    struct vfio_device_zpci_interp *data;
+    int size, rc;
+
+    size = sizeof(*feat) + sizeof(*data);
+    feat = g_malloc0(size);
+    feat->argsz = size;
+    feat->flags = VFIO_DEVICE_FEATURE_GET + VFIO_DEVICE_FEATURE_ZPCI_INTERP;
+
+    rc = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_FEATURE, feat);
+    if (rc) {
+        return rc;
+    }
+
+    data = (struct vfio_device_zpci_interp *)&feat->data;
+    pbdev->fh = data->fh;
+    return 0;
+}
+
 static void s390_pci_read_base(S390PCIBusDevice *pbdev,
                                struct vfio_device_info *info)
 {
diff --git a/include/hw/s390x/s390-pci-bus.h b/include/hw/s390x/s390-pci-bus.h
index da3cde2bb4..a9843dfe97 100644
--- a/include/hw/s390x/s390-pci-bus.h
+++ b/include/hw/s390x/s390-pci-bus.h
@@ -350,6 +350,7 @@ struct S390PCIBusDevice {
     IndAddr *indicator;
     bool pci_unplug_request_processed;
     bool unplug_requested;
+    bool interp;
     QTAILQ_ENTRY(S390PCIBusDevice) link;
 };
 
diff --git a/include/hw/s390x/s390-pci-vfio.h b/include/hw/s390x/s390-pci-vfio.h
index ff708aef50..42533e38f7 100644
--- a/include/hw/s390x/s390-pci-vfio.h
+++ b/include/hw/s390x/s390-pci-vfio.h
@@ -20,6 +20,9 @@ bool s390_pci_update_dma_avail(int fd, unsigned int *avail);
 S390PCIDMACount *s390_pci_start_dma_count(S390pciState *s,
                                           S390PCIBusDevice *pbdev);
 void s390_pci_end_dma_count(S390pciState *s, S390PCIDMACount *cnt);
+int s390_pci_probe_interp(S390PCIBusDevice *pbdev);
+int s390_pci_set_interp(S390PCIBusDevice *pbdev, bool enable);
+int s390_pci_update_passthrough_fh(S390PCIBusDevice *pbdev);
 void s390_pci_get_clp_info(S390PCIBusDevice *pbdev);
 #else
 static inline bool s390_pci_update_dma_avail(int fd, unsigned int *avail)
@@ -33,6 +36,18 @@ static inline S390PCIDMACount 
*s390_pci_start_dma_count(S390pciState *s,
 }
 static inline void s390_pci_end_dma_count(S390pciState *s,
                                           S390PCIDMACount *cnt) { }
+int s390_pci_probe_interp(S390PCIBusDevice *pbdev)
+{
+    return -EINVAL;
+}
+static inline int s390_pci_set_interp(S390PCIBusDevice *pbdev, bool enable)
+{
+    return -EINVAL;
+}
+static inline int s390_pci_update_passthrough_fh(S390PCIBusDevice *pbdev)
+{
+    return -EINVAL;
+}
 static inline void s390_pci_get_clp_info(S390PCIBusDevice *pbdev) { }
 #endif
 
-- 
2.27.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]