[PATCH v4 14/15] target/ppc: PMU Event-Based exception support

[Daniel Henrique Barboza]

From: Gustavo Romero <gromero@linux.ibm.com>

Following up the rfebb implementation, this patch adds the EBB exception
support that are triggered by Performance Monitor alerts. This exception
occurs when an enabled PMU condition or event happens and both MMCR0_EBE
and BESCR_PME are set.

The supported PM alerts will consist of counter negative conditions of
the PMU counters. This will be achieved by a timer mechanism that will
predict when a counter becomes negative. The PMU timer callback will set
the appropriate bits in MMCR0 and fire a PMC interrupt. The EBB
exception code will then set the appropriate BESCR bits, set the next
instruction pointer to the address pointed by the return register
(SPR_EBBRR), and redirect execution to the handler (pointed by
SPR_EBBHR).

This patch sets the basic structure of interrupts and timers. The
following patches will add the counter negative logic for the registers.

CC: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 target/ppc/cpu.h         |  5 ++++-
 target/ppc/excp_helper.c | 28 ++++++++++++++++++++++++++++
 target/ppc/power8-pmu.c  | 26 ++++++++++++++++++++++++--
 3 files changed, 56 insertions(+), 3 deletions(-)

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index bccf135847..98b6d6bfb5 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -129,8 +129,10 @@ enum {
     /* ISA 3.00 additions */
     POWERPC_EXCP_HVIRT    = 101,
     POWERPC_EXCP_SYSCALL_VECTORED = 102, /* scv exception                     
*/
+    POWERPC_EXCP_EBB = 103, /* Event-based branch exception                  */
+
     /* EOL                                                                   */
-    POWERPC_EXCP_NB       = 103,
+    POWERPC_EXCP_NB       = 104,
     /* QEMU exceptions: special cases we want to stop translation            */
     POWERPC_EXCP_SYSCALL_USER = 0x203, /* System call in user mode only      */
 };
@@ -2461,6 +2463,7 @@ enum {
     PPC_INTERRUPT_HMI,            /* Hypervisor Maintenance interrupt    */
     PPC_INTERRUPT_HDOORBELL,      /* Hypervisor Doorbell interrupt        */
     PPC_INTERRUPT_HVIRT,          /* Hypervisor virtualization interrupt  */
+    PPC_INTERRUPT_PMC,            /* Hypervisor virtualization interrupt  */
 };
 
 /* Processor Compatibility mask (PCR) */
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 7be334e007..88aa0a84f8 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -797,6 +797,22 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int 
excp_model, int excp)
         cpu_abort(cs, "Non maskable external exception "
                   "is not implemented yet !\n");
         break;
+    case POWERPC_EXCP_EBB:       /* Event-based branch exception             */
+        if ((env->spr[SPR_BESCR] & BESCR_GE) &&
+            (env->spr[SPR_BESCR] & BESCR_PME)) {
+            target_ulong nip;
+
+            env->spr[SPR_BESCR] &= ~BESCR_GE;   /* Clear GE */
+            env->spr[SPR_BESCR] |= BESCR_PMEO;  /* Set PMEO */
+            env->spr[SPR_EBBRR] = env->nip;     /* Save NIP for rfebb insn */
+            nip = env->spr[SPR_EBBHR];          /* EBB handler */
+            powerpc_set_excp_state(cpu, nip, env->msr);
+        }
+        /*
+         * This interrupt is handled by userspace. No need
+         * to proceed.
+         */
+        return;
     default:
     excp_invalid:
         cpu_abort(cs, "Invalid PowerPC exception %d. Aborting\n", excp);
@@ -1044,6 +1060,18 @@ static void ppc_hw_interrupt(CPUPPCState *env)
             powerpc_excp(cpu, env->excp_model, POWERPC_EXCP_THERM);
             return;
         }
+        /* PMC -> Event-based branch exception */
+        if (env->pending_interrupts & (1 << PPC_INTERRUPT_PMC)) {
+            /*
+             * Performance Monitor event-based exception can only
+             * occur in problem state.
+             */
+            if (msr_pr == 1) {
+                env->pending_interrupts &= ~(1 << PPC_INTERRUPT_PMC);
+                powerpc_excp(cpu, env->excp_model, POWERPC_EXCP_EBB);
+                return;
+            }
+        }
     }
 
     if (env->resume_as_sreset) {
diff --git a/target/ppc/power8-pmu.c b/target/ppc/power8-pmu.c
index 4bd07ba865..7ccdd03902 100644
--- a/target/ppc/power8-pmu.c
+++ b/target/ppc/power8-pmu.c
@@ -312,8 +312,30 @@ static void fire_PMC_interrupt(PowerPCCPU *cpu)
         return;
     }
 
-    /* PMC interrupt not implemented yet */
-    return;
+    if (env->spr[SPR_POWER_MMCR0] & MMCR0_FCECE) {
+        env->spr[SPR_POWER_MMCR0] &= ~MMCR0_FCECE;
+        env->spr[SPR_POWER_MMCR0] |= MMCR0_FC;
+
+        /* Changing MMCR0_FC demands a new hflags compute */
+        hreg_compute_hflags(env);
+
+        /*
+         * Delete all pending timers if we need to freeze
+         * the PMC. We'll restart them when the PMC starts
+         * running again.
+         */
+        pmu_delete_timers(env);
+    }
+
+    pmu_events_update_cycles(env);
+
+    if (env->spr[SPR_POWER_MMCR0] & MMCR0_PMAE) {
+        env->spr[SPR_POWER_MMCR0] &= ~MMCR0_PMAE;
+        env->spr[SPR_POWER_MMCR0] |= MMCR0_PMAO;
+    }
+
+    /* Fire the PMC hardware exception */
+    ppc_set_irq(cpu, PPC_INTERRUPT_PMC, 1);
 }
 
 /* This helper assumes that the PMC is running. */
-- 
2.31.1