qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH qemu v20] spapr: Implement Open Firmware client interface


From: David Gibson
Subject: Re: [PATCH qemu v20] spapr: Implement Open Firmware client interface
Date: Fri, 4 Jun 2021 16:21:32 +1000

On Tue, Jun 01, 2021 at 04:12:44PM +0200, BALATON Zoltan wrote:
> On Tue, 1 Jun 2021, Alexey Kardashevskiy wrote:
> > On 31/05/2021 23:07, BALATON Zoltan wrote:
> > > On Sun, 30 May 2021, BALATON Zoltan wrote:
> > > > On Thu, 20 May 2021, Alexey Kardashevskiy wrote:
> > > > > diff --git a/hw/ppc/vof.c b/hw/ppc/vof.c
> > > > > new file mode 100644
> > > > > index 000000000000..a283b7d251a7
> > > > > --- /dev/null
> > > > > +++ b/hw/ppc/vof.c
> > > > > @@ -0,0 +1,1021 @@
> > > > > +/*
> > > > > + * QEMU PowerPC Virtual Open Firmware.
> > > > > + *
> > > > > + * This implements client interface from OpenFirmware
> > > > > IEEE1275 on the QEMU
> > > > > + * side to leave only a very basic firmware in the VM.
> > > > > + *
> > > > > + * Copyright (c) 2021 IBM Corporation.
> > > > > + *
> > > > > + * SPDX-License-Identifier: GPL-2.0-or-later
> > > > > + */
> > > > > +
> > > > > +#include "qemu/osdep.h"
> > > > > +#include "qemu-common.h"
> > > > > +#include "qemu/timer.h"
> > > > > +#include "qemu/range.h"
> > > > > +#include "qemu/units.h"
> > > > > +#include "qapi/error.h"
> > > > > +#include <sys/ioctl.h>
> > > > > +#include "exec/ram_addr.h"
> > > > > +#include "exec/address-spaces.h"
> > > > > +#include "hw/ppc/vof.h"
> > > > > +#include "hw/ppc/fdt.h"
> > > > > +#include "sysemu/runstate.h"
> > > > > +#include "qom/qom-qobject.h"
> > > > > +#include "trace.h"
> > > > > +
> > > > > +#include <libfdt.h>
> > > > > +
> > > > > +/*
> > > > > + * OF 1275 "nextprop" description suggests is it 32 bytes max but
> > > > > + * LoPAPR defines "ibm,query-interrupt-source-number" which
> > > > > is 33 chars long.
> > > > > + */
> > > > > +#define OF_PROPNAME_LEN_MAX 64
> > > > > +
> > > > > +#define VOF_MAX_PATH        256
> > > > > +#define VOF_MAX_SETPROPLEN  2048
> > > > > +#define VOF_MAX_METHODLEN   256
> > > > > +#define VOF_MAX_FORTHCODE   256
> > > > > +#define VOF_VTY_BUF_SIZE    256
> > > > > +
> > > > > +typedef struct {
> > > > > +    uint64_t start;
> > > > > +    uint64_t size;
> > > > > +} OfClaimed;
> > > > > +
> > > > > +typedef struct {
> > > > > +    char *path; /* the path used to open the instance */
> > > > > +    uint32_t phandle;
> > > > > +} OfInstance;
> > > > > +
> > > > > +#define VOF_MEM_READ(pa, buf, size) \
> > > > > +    address_space_read_full(&address_space_memory, \
> > > > > +    (pa), MEMTXATTRS_UNSPECIFIED, (buf), (size))
> > > > > +#define VOF_MEM_WRITE(pa, buf, size) \
> > > > > +    address_space_write(&address_space_memory, \
> > > > > +    (pa), MEMTXATTRS_UNSPECIFIED, (buf), (size))
> > > > > +
> > > > > +static int readstr(hwaddr pa, char *buf, int size)
> > > > > +{
> > > > > +    if (VOF_MEM_READ(pa, buf, size) != MEMTX_OK) {
> > > > > +        return -1;
> > > > > +    }
> > > > > +    if (strnlen(buf, size) == size) {
> > > > > +        buf[size - 1] = '\0';
> > > > > +        trace_vof_error_str_truncated(buf, size);
> > > > > +        return -1;
> > > > > +    }
> > > > > +    return 0;
> > > > > +}
> > > > > +
> > > > > +static bool cmpservice(const char *s, unsigned nargs, unsigned nret,
> > > > > +                       const char *s1, unsigned nargscheck,
> > > > > unsigned nretcheck)
> > > > > +{
> > > > > +    if (strcmp(s, s1)) {
> > > > > +        return false;
> > > > > +    }
> > > > > +    if ((nargscheck && (nargs != nargscheck)) ||
> > > > > +        (nretcheck && (nret != nretcheck))) {
> > > > > +        trace_vof_error_param(s, nargscheck, nretcheck, nargs, nret);
> > > > > +        return false;
> > > > > +    }
> > > > > +
> > > > > +    return true;
> > > > > +}
> > > > > +
> > > > > +static void prop_format(char *tval, int tlen, const void *prop, int 
> > > > > len)
> > > > > +{
> > > > > +    int i;
> > > > > +    const unsigned char *c;
> > > > > +    char *t;
> > > > > +    const char bin[] = "...";
> > > > > +
> > > > > +    for (i = 0, c = prop; i < len; ++i, ++c) {
> > > > > +        if (*c == '\0' && i == len - 1) {
> > > > > +            strncpy(tval, prop, tlen - 1);
> > > > > +            return;
> > > > > +        }
> > > > > +        if (*c < 0x20 || *c >= 0x80) {
> > > > > +            break;
> > > > > +        }
> > > > > +    }
> > > > > +
> > > > > +    for (i = 0, c = prop, t = tval; i < len; ++i, ++c) {
> > > > > +        if (t >= tval + tlen - sizeof(bin) - 1 - 2 - 1) {
> > > > > +            strcpy(t, bin);
> > > > > +            return;
> > > > > +        }
> > > > > +        if (i && i % 4 == 0 && i != len - 1) {
> > > > > +            strcat(t, " ");
> > > > > +            ++t;
> > > > > +        }
> > > > > +        t += sprintf(t, "%02X", *c & 0xFF);
> > > > > +    }
> > > > > +}
> > > > > +
> > > > > +static int get_path(const void *fdt, int offset, char *buf, int len)
> > > > > +{
> > > > > +    int ret;
> > > > > +
> > > > > +    ret = fdt_get_path(fdt, offset, buf, len - 1);
> > > > > +    if (ret < 0) {
> > > > > +        return ret;
> > > > > +    }
> > > > > +
> > > > > +    buf[len - 1] = '\0';
> > > > > +
> > > > > +    return strlen(buf) + 1;
> > > > > +}
> > > > > +
> > > > > +static int phandle_to_path(const void *fdt, uint32_t ph,
> > > > > char *buf, int len)
> > > > > +{
> > > > > +    int ret;
> > > > > +
> > > > > +    ret = fdt_node_offset_by_phandle(fdt, ph);
> > > > > +    if (ret < 0) {
> > > > > +        return ret;
> > > > > +    }
> > > > > +
> > > > > +    return get_path(fdt, ret, buf, len);
> > > > > +}
> > > > > +
> > > > > +static uint32_t vof_finddevice(const void *fdt, uint32_t nodeaddr)
> > > > > +{
> > > > > +    char fullnode[VOF_MAX_PATH];
> > > > > +    uint32_t ret = -1;
> > > > > +    int offset;
> > > > > +
> > > > > +    if (readstr(nodeaddr, fullnode, sizeof(fullnode))) {
> > > > > +        return (uint32_t) ret;
> > > > > +    }
> > > > > +
> > > > > +    offset = fdt_path_offset(fdt, fullnode);
> > > > > +    if (offset >= 0) {
> > > > > +        ret = fdt_get_phandle(fdt, offset);
> > > > > +    }
> > > > > +    trace_vof_finddevice(fullnode, ret);
> > > > > +    return (uint32_t) ret;
> > > > > +}
> > > > 
> > > > The Linux init function that runs on pegasos2 here:
> > > > 
> > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/powerpc/kernel/prom_init.c?h=v4.14.234#n2658
> > > > 
> > > > calls finddevice once with isa@c and next with isa@C (small and
> > > > capital C) both of which works with the board firmware but with
> > > > vof the comparison is case sensitive and one of these fails so I
> > > > can't make it work. I don't know if this is a problem in libfdt
> > > > or the vof_finddevice above should do something else to get case
> > > > insensitive comparison.
> > > 
> > > This fixes the issue with Linux but I'm not sure if there's any
> > > better solution or would it break anything else.
> > 
> > The bit after "@" is an address and needs to be case insensitive and
> > I'll fix this indeed. I'm not so sure about the part before "@", I
> > cannot imagine what could break if I made search insensitive to case. Hm
> > :-/
> 
> Fixing the match in the address part is probably enough as the name sent by
> guests is probably always lower case

I'm confused, I thought you just said that it looked for both isa@c
and isa@C, which seems to contradict guests always using lower case.

> but the address could be formatted
> differently and that's what caused the problem. The patch below was only a
> quick fix to be able to test it further but your fix should work too.
> 
> With this and the ld replaced in entry.S I can now boot Linux which is
> enough to submit the pegasos2 vof patch after an updated patch from you
> fixes these in vof.
> 
> MorphOS still misses something but I'm not sure what as it uses the data
> gathered from the device tree later without printing diagnostics and fails
> due to a NULL dereference much after that so it seems to assume some value
> should exist but I'm not sure what value it needs and where that should come
> from. Maybe I'll try some more to find out just to make it simpler to boot
> but since it boots with the board firmware it's enough if Linux works with
> vof for now.

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

Attachment: signature.asc
Description: PGP signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]