[Qemu-discuss] Qemu versatilepb booting u-boot from flash

[Marcin Krzemiński]

Hi,

I want to start u-boot ( or any other bear metal program ) from flash in versatilepb board. I am usung a command:

qemu-system-arm -M versatilepb -m 128M -serial stdio -pflash flash.bin -display none -monitor null

No mateher what is in flash.bin file I am always get this error:

qemu: fatal: Trying to execute code outside RAM or ROM at 0x0c000000

R00=00000000 R01=00000000 R02=00000000 R03=00000000

R04=00000000 R05=00000000 R06=00000000 R07=00000000

R08=00000000 R09=00000000 R10=00000000 R11=00000000

R12=00000000 R13=00000000 R14=00000000 R15=0c000000

PSR=400001d3 -Z-- A svc32

s00=00000000 s01=00000000 d00=0000000000000000

s02=00000000 s03=00000000 d01=0000000000000000

s04=00000000 s05=00000000 d02=0000000000000000

s06=00000000 s07=00000000 d03=0000000000000000

s08=00000000 s09=00000000 d04=0000000000000000

s10=00000000 s11=00000000 d05=0000000000000000

s12=00000000 s13=00000000 d06=0000000000000000

s14=00000000 s15=00000000 d07=0000000000000000

s16=00000000 s17=00000000 d08=0000000000000000

s18=00000000 s19=00000000 d09=0000000000000000

s20=00000000 s21=00000000 d10=0000000000000000

s22=00000000 s23=00000000 d11=0000000000000000

s24=00000000 s25=00000000 d12=0000000000000000

s26=00000000 s27=00000000 d13=0000000000000000

s28=00000000 s29=00000000 d14=0000000000000000

s30=00000000 s31=00000000 d15=0000000000000000

FPSCR: 00000000

Aborted (core dumped)

In my opinion flash device is not mapped What am I doing wrong?

Regards,

Marcin