Hello everybody,
Thank you for your quick response and for the time you spent to help me find
the best way to keep old hardware productive.
Perhaps, it's best to describe my situation a bit more detailed to clarify the
situation:
Back in the 1980th / 1990th, our company bought several parameter test systems
(used for in-production testing of semiconductor devices). Those systems have a
build in computer-board (based on an 68040 microprocessor). All of those
testers are controlled by two Sun SPARCs running Solaris 8. User Interface,
program generation and everything else is done on the Sun. The vendor of the
test systems supplied us with some shared object libraries, we may use in our
programs to control the tester (make it force some voltages, measure some
current and so on). So, basically we develop programs on the Sun, and use the
vendor-supplied lib to convert and transfer our commands to the tester, wich
returns the results back. Please note: communication from Sun to tester is done
via ethernet, but they are using their own network protocol and not e.g.
tcp/ip. Unfortunately, I have only very little information about that network
protocol.
The tester-hardware is still in good condition (though out of support) and its
performance is still sufficient for most of our products. The longer, the
testers are usable, the more money we save.
On the other hand, the Sun SPARCs are out of support as well, and I am afraid
that some time one of them breaks down leaving us in a quite difficult
situation.
So I just want to check out, if it's possible to move the programs, which are currently
running on the Sun SPARC, to an x86/Linux PC using some kind of "SPARC
emulator".
@Jim: thanks a lot, for showing me, which difficulties I have do deal with.
Sounds like it will take quite a lot of time and it's definitely not sure, that
it all ends up with a reliable system.
@ Tony Su: You are right: I am asking how to run a Solaris application compiled
for SPARC hardware on an modern x86 linux computer. About your question
concerning direct hardware access: I am pretty sure this is not required.
Although they use their own network protocol, it is possible to use the same
network interface for in-house communication using tcp/ip and tester
communication.
@Dennis: sorry, but reverse engineering is not an option for me. Maybe, it can
be done on the network protocol itself, but this is only a small part of what
has to be done. With almost no documentation about what's going on on the
tester cpu, it's simply to much work for me.
@Jerry: please, calm down. Dennis did not start the thread, I did. He is trying
to help me just as you do, and he tried to clarify, what I may not have said
that clear. So please don't blame him for insulating others.
Once again, thank you for your answers.
Hartmut
Am 31.08.2014 um 14:56 schrieb Jerry Stuckle:
> On 8/31/2014 12:44 AM, Dennis Luehring wrote:
>> Am 30.08.2014 23:18, schrieb Tony Su:
>>> Need some clarification,
>>> Are you really asking how to run Solaris on x86 or the other way
>>> around? I'm going to assume you have a Solaris application running on
>>> SPARC hardware and you want to explore options running on Linux
>>> instead because it doesn't make much sense to me that you would want
>>> to continue to run on ancient hardware. Even consumer grade
>>> contemporary hardware is probably a better economic decision than to
>>> run on that old hardware.
>> "I want to replace the SPARC by a state-of-the art Linux / x86 computer"
>>
>> isn't that clear enough - don't assume - read the email
>>
> Which didn't answer Tony's question - the same one I had. Maybe the
> problem is not in his reading - but your description.
>
> Of course insulting people trying to help you is a great way to
> encourage people to give you assistance - especially when you're not
> paying them for it.
>
>>> So, what are your options?
>>> Let's say your application only exists running on Solaris 8 and it
>>> requires access to, and uses SPARC hardware.
>>> In this case, you might consider cobbling together a SPARC environment
>>> using QEMU emulation.QEMU should support all Sun SPARC CPUs and most
>>> likely any SPARC I/O devices as well.
>> thats new to me - the SPARC part of qemu seems to be in an sometimes
>> very experimental state
>>
> I haven't tried it personally but I think a friend of mine has.
> Unfortunately, it's a long weekend here and he's gone to the beach, so I
> won't be able to talk to him until at least Tuesday or Wednesday.
>
>>> Let's say your app only runs on Solaris 8 but does not require access
>>> to SPARC hardware.
>>> In this case, you can use almost any virtualization that exists
>>> because various Solaris runs on x86 (I haven't checked whether Solaris
>>> 8 is one of them). You should be able to use KVM, VMware, VirtualBox,
>>> Parallels, Hyper-V(I'm guessing), Xen or anything else for better
>>> performance.
>>>
>> but the current system is SPARC so no x86 virtualizer can help to run
>> its SPARC code
>> on x86 - or how is that possible?
>>
>>
> He didn't say an x86 virtualizer. But this goes back to the very first
> question.
>
> Jerry
>