[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 01/15] docs: add minibmc section in aspeed document
From: |
Cédric Le Goater |
Subject: |
[PULL 01/15] docs: add minibmc section in aspeed document |
Date: |
Wed, 25 May 2022 18:01:22 +0200 |
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220506031521.13254-2-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
docs/system/arm/aspeed.rst | 61 ++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
index 60ed94f18759..6f2e4fb53d49 100644
--- a/docs/system/arm/aspeed.rst
+++ b/docs/system/arm/aspeed.rst
@@ -120,3 +120,64 @@ FMC chip and a bigger (64M) SPI chip, use :
.. code-block:: bash
-M ast2500-evb,fmc-model=mx25l25635e,spi-model=mx66u51235f
+
+
+Aspeed minibmc family boards (``ast1030-evb``)
+==================================================================
+
+The QEMU Aspeed machines model mini BMCs of various Aspeed evaluation
+boards. They are based on different releases of the
+Aspeed SoC : the AST1030 integrating an ARM Cortex M4F CPU (200MHz).
+
+The SoC comes with SRAM, SPI, I2C, etc.
+
+AST1030 SoC based machines :
+
+- ``ast1030-evb`` Aspeed AST1030 Evaluation board (Cortex-M4F)
+
+Supported devices
+-----------------
+
+ * SMP (for the AST1030 Cortex-M4F)
+ * Interrupt Controller (VIC)
+ * Timer Controller
+ * I2C Controller
+ * System Control Unit (SCU)
+ * SRAM mapping
+ * Static Memory Controller (SMC or FMC) - Only SPI Flash support
+ * SPI Memory Controller
+ * USB 2.0 Controller
+ * Watchdog Controller
+ * GPIO Controller (Master only)
+ * UART
+ * LPC Peripheral Controller (a subset of subdevices are supported)
+ * Hash/Crypto Engine (HACE) - Hash support only. TODO: HMAC and RSA
+ * ADC
+
+
+Missing devices
+---------------
+
+ * PWM and Fan Controller
+ * Slave GPIO Controller
+ * PECI Controller
+ * Mailbox Controller
+ * Virtual UART
+ * eSPI Controller
+ * I3C Controller
+
+Boot options
+------------
+
+The Aspeed machines can be started using the ``-kernel`` to load a
+Zephyr OS or from a firmware. Images can be downloaded from the
+ASPEED GitHub release repository :
+
+ https://github.com/AspeedTech-BMC/zephyr/releases
+
+To boot a kernel directly from a Zephyr build tree:
+
+.. code-block:: bash
+
+ $ qemu-system-arm -M ast1030-evb -nographic \
+ -kernel zephyr.elf
--
2.35.3
- [PULL 00/15] aspeed queue, Cédric Le Goater, 2022/05/25
- [PULL 03/15] docs: aspeed: Add fby35 board, Cédric Le Goater, 2022/05/25
- [PULL 05/15] aspeed: Introduce a get_irq AspeedSoCClass method, Cédric Le Goater, 2022/05/25
- [PULL 04/15] hw: m25p80: allow write_enable latch get/set, Cédric Le Goater, 2022/05/25
- [PULL 02/15] hw/arm/aspeed: Add fby35 machine type, Cédric Le Goater, 2022/05/25
- [PULL 01/15] docs: add minibmc section in aspeed document,
Cédric Le Goater <=
- [PULL 06/15] hw: aspeed: Add missing UART's, Cédric Le Goater, 2022/05/25
- [PULL 08/15] hw: aspeed: Ensure AST1030 respects uart-default, Cédric Le Goater, 2022/05/25
- [PULL 10/15] hw: aspeed: Init all UART's with serial devices, Cédric Le Goater, 2022/05/25
- [PULL 11/15] hw/gpio Add GPIO read/write trace event., Cédric Le Goater, 2022/05/25
- [PULL 07/15] hw: aspeed: Add uarts_num SoC attribute, Cédric Le Goater, 2022/05/25
- [PULL 12/15] hw/gpio: Add ASPEED GPIO model for AST1030, Cédric Le Goater, 2022/05/25
- [PULL 09/15] hw: aspeed: Introduce common UART init function, Cédric Le Goater, 2022/05/25
- [PULL 13/15] hw/gpio support GPIO index mode for write operation., Cédric Le Goater, 2022/05/25
- [PULL 14/15] hw/gpio: replace HWADDR_PRIx with PRIx64, Cédric Le Goater, 2022/05/25
- [PULL 15/15] hw/arm/aspeed: Add i2c devices for AST2600 EVB, Cédric Le Goater, 2022/05/25