qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 07/22] hw/intc/arm_gicv3_cpuif: Handle CPUs that don't specify GIC


From: Peter Maydell
Subject: [PULL 07/22] hw/intc/arm_gicv3_cpuif: Handle CPUs that don't specify GICv3 parameters
Date: Thu, 19 May 2022 18:36:36 +0100

We allow a GICv3 to be connected to any CPU, but we don't do anything
to handle the case where the CPU type doesn't in hardware have a
GICv3 CPU interface and so the various GIC configuration fields
(gic_num_lrs, vprebits, vpribits) are not specified.

The current behaviour is that we will add the EL1 CPU interface
registers, but will not put in the EL2 CPU interface registers, even
if the CPU has EL2, which will leave the GIC in a broken state and
probably result in the guest crashing as it tries to set it up.  This
only affects the virt board when using the cortex-a15 or cortex-a7
CPU types (both 32-bit) with -machine gic-version=3 (or 'max')
and -machine virtualization=on.

Instead of failing to set up the EL2 registers, if the CPU doesn't
define the GIC configuration set it to a reasonable default, matching
the standard configuration for most Arm CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-2-peter.maydell@linaro.org
---
 hw/intc/arm_gicv3_cpuif.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index 9efba798f82..df2f8583564 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -2755,6 +2755,15 @@ void gicv3_init_cpuif(GICv3State *s)
         ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
         GICv3CPUState *cs = &s->cpu[i];
 
+        /*
+         * If the CPU doesn't define a GICv3 configuration, probably because
+         * in real hardware it doesn't have one, then we use default values
+         * matching the one used by most Arm CPUs. This applies to:
+         *  cpu->gic_num_lrs
+         *  cpu->gic_vpribits
+         *  cpu->gic_vprebits
+         */
+
         /* Note that we can't just use the GICv3CPUState as an opaque pointer
          * in define_arm_cp_regs_with_opaque(), because when we're called back
          * it might be with code translated by CPU 0 but run by CPU 1, in
@@ -2763,13 +2772,12 @@ void gicv3_init_cpuif(GICv3State *s)
          * get back to the GICv3CPUState from the CPUARMState.
          */
         define_arm_cp_regs(cpu, gicv3_cpuif_reginfo);
-        if (arm_feature(&cpu->env, ARM_FEATURE_EL2)
-            && cpu->gic_num_lrs) {
+        if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) {
             int j;
 
-            cs->num_list_regs = cpu->gic_num_lrs;
-            cs->vpribits = cpu->gic_vpribits;
-            cs->vprebits = cpu->gic_vprebits;
+            cs->num_list_regs = cpu->gic_num_lrs ?: 4;
+            cs->vpribits = cpu->gic_vpribits ?: 5;
+            cs->vprebits = cpu->gic_vprebits ?: 5;
 
             /* Check against architectural constraints: getting these
              * wrong would be a bug in the CPU code defining these,
-- 
2.25.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]