On 4/21/22 21:30, Mark Cave-Ayland wrote:
This patchset started off when I noticed that dino.c was accessing parent_obj
directly rather than using a QOM cast. After fixing that I noticed quite a few
other improvements that could be done to bring hppa up to our recommended
coding standards.
The main aim of this patchset is to de-couple the dino and lasi devices from
the board using QOM to handle the initialisation instead of having global
device init functions. Included in this is switching the onboard devices
over to use qdev GPIOs for wiring instead of directly allocating QEMU IRQs.
Along the way I've renamed the board config from CONFIG_DINO to
CONFIG_HPPA_GENERIC since that better represents the machine type, and then
used CONFIG_DINO and CONFIG_LASI for the appropriate devices which have been
moved to hw/pci-host/dino.c and hw/misc/lasi.c respectively.
After the reorganisation it was trivial to remove hppa_sys.h and the majority
of pci.c which wasn't being used. Finally I tidied up the use of the QOM
machine type macros in machine.c.
The result has been lightly tested with a tiny Linux image I had lying around
for testing my recent ESP changes, so more testing is welcome. There is a bit
more work to be done sorting out the lasips2 device init and machine init, but
since the patchset is already quite big I can follow up with that once this
series has been merged.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Marc, thanks a lot for this big cleanup!
I've reviewed and tested it with Linux and HP-UX guests.
Please add:
Acked-by: Helge Deller <deller@gmx.de>
Thanks!!
Helge
Mark Cave-Ayland (50):
dino: checkpatch fixes
dino: move registers from dino_init() to DINO_PCI_BRIDGE init function
dino: move PCI bus initialisation to dino_pcihost_init()
dino: move PCI windows initialisation to dino_pcihost_init()
dino: add memory-as property containing a link to the memory address
space
dino: move pci_setup_iommu() to dino_pcihost_init()
dino: move PCI bus master address space setup to
dino_pcihost_realize()
dino: move initial register configuration to new dino_pcihost_reset()
function
dino: use QOM cast instead of directly referencing parent_obj
dino: return PCIBus from dino_init() using qdev_get_child_bus()
dino: split declarations from dino.c into dino.h
hppa: use new CONFIG_HPPA_GENERIC option instead of CONFIG_DINO to
build hppa machine
dino: change dino_init() to return the DINO device instead of PCIBus
machine.c: map DINO device during board configuration
dino.h: add defines for DINO IRQ numbers
dino: define IRQ inputs as qdev GPIOs
dino: wire up serial IRQ using a qdev GPIO in machine.c
dino: remove unused dino_set_timer_irq() IRQ handler
hppa: move dino_init() from dino.c to machine.c
dino: use numerical constant for iar0 and iar1 reset values
dino: move DINO HPA constants from hppa_hardware.h to dino.h
dino: move from hw/hppa to hw/pci-host
lasi: checkpatch fixes
lasi: move memory region initialisation to new lasi_init() function
lasi: move register memory mapping from lasi.c to machine.c
lasi: move initialisation of iar and rtc to new lasi_reset() function
lasi: move LASIState and associated QOM structures to lasi.h
lasi: replace lasi_get_irq() with defined constants
lasi: define IRQ inputs as qdev GPIOs
lasi: use qdev GPIOs to wire up IRQs in lasi_initfn()
lasi: fix serial port initialisation
lasi: update lasi_initfn() to return LASIState
lasi: move LAN initialisation to machine.c
lasi: move parallel port initialisation to machine.c
lasi: move second serial port initialisation to machine.c
lasi: move PS2 initialisation to machine.c
lasi: remove address space parameter from lasi_initfn()
lasi: move lasi_initfn() to machine.c
lasi: use constants for device register offsets
lasi: use numerical constant for iar reset value
hppa: move device headers from hppa_sys.h into individual .c files
lasi: move from hw/hppa to hw/misc
hppa: move hppa_pci_ignore_ops from pci.c to machine.c
hppa: remove hw/hppa/pci.c
hppa: remove unused trace-events from from hw/hppa
hppa: move enable_lan() define from hppa_sys.h to machine.c
hppa: remove the empty hppa_sys.h file
hppa: use MACHINE QOM macros for defining the hppa machine
hppa: fold machine_hppa_machine_init() into
machine_hppa_machine_init_class_init()
hppa: simplify machine function names in machine.c
MAINTAINERS | 4 +
configs/devices/hppa-softmmu/default.mak | 2 +-
hw/hppa/Kconfig | 5 +-
hw/hppa/hppa_hardware.h | 5 -
hw/hppa/hppa_sys.h | 24 ---
hw/hppa/machine.c | 122 +++++++++---
hw/hppa/meson.build | 2 +-
hw/hppa/pci.c | 88 ---------
hw/hppa/trace-events | 14 --
hw/misc/Kconfig | 3 +
hw/{hppa => misc}/lasi.c | 161 ++++------------
hw/misc/meson.build | 3 +
hw/misc/trace-events | 5 +
hw/pci-host/Kconfig | 4 +
hw/{hppa => pci-host}/dino.c | 231 +++++++----------------
hw/pci-host/meson.build | 3 +
hw/pci-host/trace-events | 5 +
include/hw/misc/lasi.h | 78 ++++++++
include/hw/pci-host/dino.h | 146 ++++++++++++++
meson.build | 1 -
20 files changed, 462 insertions(+), 444 deletions(-)
delete mode 100644 hw/hppa/hppa_sys.h
delete mode 100644 hw/hppa/pci.c
delete mode 100644 hw/hppa/trace-events
rename hw/{hppa => misc}/lasi.c (60%)
rename hw/{hppa => pci-host}/dino.c (71%)
create mode 100644 include/hw/misc/lasi.h
create mode 100644 include/hw/pci-host/dino.h