Re: [PATCH 3/5] tests/boot_linux_console: Add a SD card test for the OrangePi PC board

[Cleber Rosa]

On Tue, Dec 17, 2019 at 07:27:28PM +0100, Philippe Mathieu-Daudé wrote:
> The kernel image and DeviceTree blob are built by the Raspbian
> project (based on Debian):
> https://www.raspbian.org/RaspbianImages
> 
> The SD image is from the kernelci.org project:
> https://kernelci.org/faq/#the-code
> 
> If ARM is a target being built, "make check-acceptance" will
> automatically include this test by the use of the "arch:arm" tags.
> 
> Alternatively, this test can be run using:
> 
>   $ avocado --show=console run -t machine:orangepi-pc 
> tests/acceptance/boot_linux_console.py
>   console: Uncompressing Linux... done, booting the kernel.
>   console: Booting Linux on physical CPU 0x0
>   console: Linux version 4.20.7-sunxi (address@hidden) (gcc version 7.2.1 
> 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
>   console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
>   [...]
>   console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, 
> nowayout=0)
>   console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
>   console: sunxi-mmc 1c0f000.mmc: Got CD GPIO
>   console: ledtrig-cpu: registered to indicate activity on CPUs
>   console: hidraw: raw HID events driver (C) Jiri Kosina
>   console: usbcore: registered new interface driver usbhid
>   console: usbhid: USB HID core driver
>   console: Initializing XFRM netlink socket
>   console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
>   console: NET: Registered protocol family 10
>   console: mmc0: host does not support reading read-only switch, assuming 
> write-enable
>   console: mmc0: Problem switching card into high-speed mode!
>   console: mmc0: new SD card at address 4567
>   console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB
>   [...]
>   console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 
> subsystem
>   console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null)
>   console: VFS: Mounted root (ext2 filesystem) on device 179:0.
>   console: Run /sbin/init as init process
>   console: EXT4-fs (mmcblk0): re-mounted. Opts: 
> block_validity,barrier,user_xattr,acl
>   console: Starting syslogd: OK
>   console: Starting klogd: OK
>   console: Populating /dev using udev: udevd[203]: starting version 3.2.7
>   console: /bin/sh: can't access tty; job control turned off
>   console: cat /proc/partitions
>   console: / # cat /proc/partitions
>   console: major minor  #blocks  name
>   console: 1        0       4096 ram0
>   console: 1        1       4096 ram1
>   console: 1        2       4096 ram2
>   console: 1        3       4096 ram3
>   console: 179        0      61440 mmcblk0
>   console: reboot
>   console: / # reboot
>   console: umount: devtmpfs busy - remounted read-only
>   console: EXT4-fs (mmcblk0): re-mounted. Opts: (null)
>   console: The system is going down NOW!
>   console: Sent SIGTERM to all processes
>   console: Sent SIGKILL to all processes
>   console: Requesting system reboot
>   console: reboot: Restarting system
>   JOB TIME   : 68.64 s
> 
> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
> ---
>  tests/acceptance/boot_linux_console.py | 42 ++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/tests/acceptance/boot_linux_console.py 
> b/tests/acceptance/boot_linux_console.py
> index daabd47404..8179b45910 100644
> --- a/tests/acceptance/boot_linux_console.py
> +++ b/tests/acceptance/boot_linux_console.py
> @@ -478,6 +478,48 @@ class BootLinuxConsole(Test):
>          exec_command_and_wait_for_pattern(self, 'reboot',
>                                                  'reboot: Restarting system')
>  
> +    def test_arm_orangepi_sd(self):

Same suggestion wrt test name as previous two patches.

> +        """
> +        :avocado: tags=arch:arm
> +        :avocado: tags=machine:orangepi-pc
> +        """
> +        deb_url = ('https://apt.armbian.com/pool/main/l/'
> +                   'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb')
> +        deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315'
> +        deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
> +        kernel_path = self.extract_from_deb(deb_path,
> +                                            '/boot/vmlinuz-4.20.7-sunxi')
> +        dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb'
> +        dtb_path = self.extract_from_deb(deb_path, dtb_path)
> +        rootfs_url = ('http://storage.kernelci.org/images/rootfs/buildroot/'
> +                      'kci-2019.02/armel/base/rootfs.ext2.xz')
> +        rootfs_hash = '692510cb625efda31640d1de0a8d60e26040f061'
> +        rootfs_path_xz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash)
> +        rootfs_path = os.path.join(self.workdir, 'rootfs.cpio')
> +        archive.lzma_uncompress(rootfs_path_xz, rootfs_path)
> +
> +        self.vm.set_machine('orangepi-pc')

Can/should be dropped.

With this,

Tested-by: Cleber Rosa <address@hidden>
Reviewed-by: Cleber Rosa <address@hidden>

signature.asc
Description: PGP signature