[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH for-5.0 v11 00/20] VIRTIO-IOMMU device
From: |
Auger Eric |
Subject: |
Re: [PATCH for-5.0 v11 00/20] VIRTIO-IOMMU device |
Date: |
Wed, 11 Dec 2019 17:48:05 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0 |
Hi Michael,
On 12/11/19 5:40 PM, Michael S. Tsirkin wrote:
> On Fri, Nov 22, 2019 at 07:29:23PM +0100, Eric Auger wrote:
>> This series implements the QEMU virtio-iommu device.
>>
>> This matches the v0.12 spec and the corresponding virtio-iommu
>> driver upstreamed in 5.3.
>>
>> The pci proxy for the virtio-iommu device is instantiated using
>> "-device virtio-iommu-pci". This series still relies on ACPI IORT/DT
>> integration. Note the ACPI IORT integration is not yet upstreamed
>> and testing needs to be based on Jean-Philippe's additional
>> kernel patches [1].
>
> Or the config space approach? I really liked that one.
Yes this corresponds to the paragraph below.
>
>>
>> Work is ongoing to remove IORT adherence and allow the
>> bindings between the IOMMU and the root complex to be defined
>> and written into the PCI device configuration space. The outcome
>> of this work is uncertain at this stage though. See [2].
Thanks
Eric
>>
>> So only patches 1-11 fully rely on upstreamed kernel code. Others
>> should be considered as RFC.
>>
>> This respin allows people to test on ARM and x86. It also
>> brings migration support (tested on ARM) and various cleanups.
>> Reserved regions are now passed through an array of properties.
>> A libqos test also is introduced to test the virtio-iommu API.
>>
>> Note integration with vhost devices and vfio devices is not part
>> of this series. Please follow Bharat's respins [3].
>>
>> The 1st Patch ("migration: Support QLIST migration") was sent
>> separately [4].
>>
>> Best Regards
>>
>> Eric
>>
>> This series can be found at:
>> https://github.com/eauger/qemu/tree/v4.2-rc2-virtio-iommu-v11
>>
>> [1] kernel branch to be used for guest
>> https://github.com/eauger/linux/tree/v5.4-rc8-virtio-iommu-iort
>> [2] [RFC 00/13] virtio-iommu on non-devicetree platforms
>> [3] VFIO/VHOST integration is not part of this series. Please follow
>> [PATCH RFC v5 0/5] virtio-iommu: VFIO integration respins
>> [4] [PATCH v6] migration: Support QLIST migration
>>
>> Testing:
>> - tested with guest using virtio-net-pci
>> (,vhost=off,iommu_platform,disable-modern=off,disable-legacy=on)
>> and virtio-blk-pci
>> - migration on ARM
>> - on x86 PC machine I get some AHCI non translated transactions,
>> very early. This does not prevent the guest from boot and behaving
>> properly. Warnings look like:
>> qemu-system-x86_64: virtio_iommu_translate sid=250 is not known!!
>> qemu-system-x86_64: no buffer available in event queue to report event
>> qemu-system-x86_64: AHCI: Failed to start FIS receive engine: bad FIS
>> receive buffer address
>>
>> History:
>>
>> v10 -> v11:
>> - introduce virtio_iommu_handle_req macro
>> - migration support
>> - introduce DEFINE_PROP_INTERVAL and pass reserved regions
>> through an array of those
>> - domain gtree simplification
>>
>> v9 -> v10:
>> - rebase on 4.1.0-rc2, compliance with 0.12 spec
>> - removed ACPI part
>> - cleanup (see individual change logs)
>> - moved to a PATCH series
>>
>> v8 -> v9:
>> - virtio-iommu-pci device needs to be instantiated from the command
>> line (RID is not imposed anymore).
>> - tail structure properly initialized
>>
>> v7 -> v8:
>> - virtio-iommu-pci added
>> - virt instantiation modified
>> - DT and ACPI modified to exclude the iommu RID from the mapping
>> - VIRTIO_IOMMU_F_BYPASS, VIRTIO_F_VERSION_1 features exposed
>>
>> v6 -> v7:
>> - rebase on qemu 3.0.0-rc3
>> - minor update against v0.7
>> - fix issue with EP not on pci.0 and ACPI probing
>> - change the instantiation method
>>
>> v5 -> v6:
>> - minor update against v0.6 spec
>> - fix g_hash_table_lookup in virtio_iommu_find_add_as
>> - replace some error_reports by qemu_log_mask(LOG_GUEST_ERROR, ...)
>>
>> v4 -> v5:
>> - event queue and fault reporting
>> - we now return the IOAPIC MSI region if the virtio-iommu is instantiated
>> in a PC machine.
>> - we bypass transactions on MSI HW region and fault on reserved ones.
>> - We support ACPI boot with mach-virt (based on IORT proposal)
>> - We moved to the new driver naming conventions
>> - simplified mach-virt instantiation
>> - worked around the disappearing of pci_find_primary_bus
>> - in virtio_iommu_translate, check the dev->as is not NULL
>> - initialize as->device_list in virtio_iommu_get_as
>> - initialize bufstate.error to false in virtio_iommu_probe
>>
>> v3 -> v4:
>> - probe request support although no reserved region is returned at
>> the moment
>> - unmap semantics less strict, as specified in v0.4
>> - device registration, attach/detach revisited
>> - split into smaller patches to ease review
>> - propose a way to inform the IOMMU mr about the page_size_mask
>> of underlying HW IOMMU, if any
>> - remove warning associated with the translation of the MSI doorbell
>>
>> v2 -> v3:
>> - rebase on top of 2.10-rc0 and especially
>> [PATCH qemu v9 0/2] memory/iommu: QOM'fy IOMMU MemoryRegion
>> - add mutex init
>> - fix as->mappings deletion using g_tree_ref/unref
>> - when a dev is attached whereas it is already attached to
>> another address space, first detach it
>> - fix some error values
>> - page_sizes = TARGET_PAGE_MASK;
>> - I haven't changed the unmap() semantics yet, waiting for the
>> next virtio-iommu spec revision.
>>
>> v1 -> v2:
>> - fix redefinition of viommu_as typedef
>>
>>
>>
>> Eric Auger (20):
>> migration: Support QLIST migration
>> virtio-iommu: Add skeleton
>> virtio-iommu: Decode the command payload
>> virtio-iommu: Add the iommu regions
>> virtio-iommu: Endpoint and domains structs and helpers
>> virtio-iommu: Implement attach/detach command
>> virtio-iommu: Implement map/unmap
>> virtio-iommu: Implement translate
>> virtio-iommu: Implement fault reporting
>> virtio-iommu-pci: Add virtio iommu pci support
>> hw/arm/virt: Add the virtio-iommu device tree mappings
>> qapi: Introduce DEFINE_PROP_INTERVAL
>> virtio-iommu: Implement probe request
>> virtio-iommu: Handle reserved regions in the translation process
>> virtio-iommu-pci: Add array of Interval properties
>> hw/arm/virt-acpi-build: Introduce fill_iort_idmap helper
>> hw/arm/virt-acpi-build: Add virtio-iommu node in IORT table
>> virtio-iommu: Support migration
>> pc: Add support for virtio-iommu-pci
>> tests: Add virtio-iommu test
>>
>> hw/arm/virt-acpi-build.c | 91 ++-
>> hw/arm/virt.c | 53 +-
>> hw/core/qdev-properties.c | 90 +++
>> hw/i386/acpi-build.c | 72 +++
>> hw/i386/pc.c | 15 +-
>> hw/virtio/Kconfig | 5 +
>> hw/virtio/Makefile.objs | 2 +
>> hw/virtio/trace-events | 22 +
>> hw/virtio/virtio-iommu-pci.c | 91 +++
>> hw/virtio/virtio-iommu.c | 952 +++++++++++++++++++++++++++++++
>> include/exec/memory.h | 6 +
>> include/hw/acpi/acpi-defs.h | 21 +-
>> include/hw/arm/virt.h | 2 +
>> include/hw/i386/pc.h | 2 +
>> include/hw/pci/pci.h | 1 +
>> include/hw/qdev-properties.h | 3 +
>> include/hw/virtio/virtio-iommu.h | 67 +++
>> include/migration/vmstate.h | 21 +
>> include/qemu/queue.h | 39 ++
>> include/qemu/typedefs.h | 1 +
>> migration/trace-events | 5 +
>> migration/vmstate-types.c | 70 +++
>> qdev-monitor.c | 1 +
>> tests/Makefile.include | 2 +
>> tests/libqos/virtio-iommu.c | 177 ++++++
>> tests/libqos/virtio-iommu.h | 45 ++
>> tests/test-vmstate.c | 170 ++++++
>> tests/virtio-iommu-test.c | 261 +++++++++
>> 28 files changed, 2253 insertions(+), 34 deletions(-)
>> create mode 100644 hw/virtio/virtio-iommu-pci.c
>> create mode 100644 hw/virtio/virtio-iommu.c
>> create mode 100644 include/hw/virtio/virtio-iommu.h
>> create mode 100644 tests/libqos/virtio-iommu.c
>> create mode 100644 tests/libqos/virtio-iommu.h
>> create mode 100644 tests/virtio-iommu-test.c
>>
>> --
>> 2.20.1
>
>