[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 10/19] test-cutils: Prepare for upcoming semantic change in qe
From: |
Eric Blake |
Subject: |
[PATCH v3 10/19] test-cutils: Prepare for upcoming semantic change in qemu_strtosz |
Date: |
Mon, 22 May 2023 14:04:32 -0500 |
A quick search for 'qemu_strtosz' in the code base shows that outside
of the testsuite, the ONLY place that passes a non-NULL pointer to
@endptr of any variant of a size parser is in hmp.c (the 'o' parser of
monitor_parse_arguments), and that particular caller warns of
"extraneous characters at the end of line" unless the trailing bytes
are purely whitespace. Thus, it makes no semantic difference at the
high level whether we parse "1.5e1k" as "1" + ".5e1" + "k" (an attempt
to use scientific notation in strtod with a scaling suffix of 'k' with
no trailing junk, but which qemu_strtosz says should fail with
EINVAL), or as "1.5e" + "1k" (a valid size with scaling suffix of 'e'
for exabytes, followed by two junk bytes) - either way, any user
passing such a string will get an error message about a parse failure.
However, an upcoming patch to qemu_strtosz will fix other corner case
bugs in handling the fractional portion of a size, and in doing so, it
is easier to declare that qemu_strtosz() itself stops parsing at the
first 'e' rather than blindly consuming whatever strtod() will
recognize. Once that is fixed, the difference will be visible at the
low level (getting a valid parse with trailing garbage when @endptr is
non-NULL, while continuing to get -EINVAL when @endptr is NULL); this
is easier to demonstrate by moving the affected strings from
test_qemu_strtosz_invalid() (which declares them as always -EINVAL) to
test_qemu_strtosz_trailing() (where @endptr affects behavior, for now
with FIXME comments).
Note that a similar argument could be made for having "0x1.5" or
"0x1M" parse as 0x1 with ".5" or "M" as trailing junk, instead of
blindly treating it as -EINVAL; however, as these cases do not suffer
from the same problems as floating point, they are not worth changing
at this time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
---
tests/unit/test-cutils.c | 42 ++++++++++++++++++++++++++--------------
1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/tests/unit/test-cutils.c b/tests/unit/test-cutils.c
index e69b672ae57..f615dd0471c 100644
--- a/tests/unit/test-cutils.c
+++ b/tests/unit/test-cutils.c
@@ -3563,21 +3563,6 @@ static void test_qemu_strtosz_invalid(void)
g_assert_cmphex(res, ==, 0xbaadf00d);
g_assert_true(endptr == str);
- /* No floating point exponents */
- str = "1.5e1k";
- endptr = NULL;
- err = qemu_strtosz(str, &endptr, &res);
- g_assert_cmpint(err, ==, -EINVAL);
- g_assert_cmphex(res, ==, 0xbaadf00d);
- g_assert_true(endptr == str);
-
- str = "1.5E+0k";
- endptr = NULL;
- err = qemu_strtosz(str, &endptr, &res);
- g_assert_cmpint(err, ==, -EINVAL);
- g_assert_cmphex(res, ==, 0xbaadf00d);
- g_assert_true(endptr == str);
-
/* No hex fractions */
str = "0x1.8k";
endptr = NULL;
@@ -3681,6 +3666,33 @@ static void test_qemu_strtosz_trailing(void)
err = qemu_strtosz(str, NULL, &res);
g_assert_cmpint(err, ==, -EINVAL);
g_assert_cmphex(res, ==, 0xbaadf00d);
+
+ /* FIXME should stop parse after 'e'. No floating point exponents */
+ str = "1.5e1k";
+ endptr = NULL;
+ res = 0xbaadf00d;
+ err = qemu_strtosz(str, &endptr, &res);
+ g_assert_cmpint(err, ==, -EINVAL /* FIXME 0 */);
+ g_assert_cmphex(res, ==, 0xbaadf00d /* FIXME EiB * 1.5 */);
+ g_assert_true(endptr == str /* FIXME + 4 */);
+
+ res = 0xbaadf00d;
+ err = qemu_strtosz(str, NULL, &res);
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert_cmpint(res, ==, 0xbaadf00d);
+
+ str = "1.5E+0k";
+ endptr = NULL;
+ res = 0xbaadf00d;
+ err = qemu_strtosz(str, &endptr, &res);
+ g_assert_cmpint(err, ==, -EINVAL /* FIXME 0 */);
+ g_assert_cmphex(res, ==, 0xbaadf00d /* FIXME EiB * 1.5 */);
+ g_assert_true(endptr == str /* FIXME + 4 */);
+
+ res = 0xbaadf00d;
+ err = qemu_strtosz(str, NULL, &res);
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert_cmphex(res, ==, 0xbaadf00d);
}
static void test_qemu_strtosz_erange(void)
--
2.40.1
- [PATCH v3 01/19] test-cutils: Avoid g_assert in unit tests, (continued)
- [PATCH v3 01/19] test-cutils: Avoid g_assert in unit tests, Eric Blake, 2023/05/22
- [PATCH v3 02/19] test-cutils: Use g_assert_cmpuint where appropriate, Eric Blake, 2023/05/22
- [PATCH v3 07/19] cutils: Adjust signature of parse_uint[_full], Eric Blake, 2023/05/22
- [PATCH v3 14/19] test-cutils: Add more coverage to qemu_strtosz, Eric Blake, 2023/05/22
- [PATCH v3 03/19] test-cutils: Test integral qemu_strto* value on failures, Eric Blake, 2023/05/22
- [PATCH v3 05/19] cutils: Fix wraparound parsing in qemu_strtoui, Eric Blake, 2023/05/22
- [PATCH v3 08/19] cutils: Allow NULL endptr in parse_uint(), Eric Blake, 2023/05/22
- [PATCH v3 09/19] test-cutils: Add coverage of qemu_strtod, Eric Blake, 2023/05/22
- [PATCH v3 16/19] cutils: Set value in all integral qemu_strto* error paths, Eric Blake, 2023/05/22
- [PATCH v3 10/19] test-cutils: Prepare for upcoming semantic change in qemu_strtosz,
Eric Blake <=
- [PATCH v3 12/19] cutils: Allow NULL str in qemu_strtosz, Eric Blake, 2023/05/22
- [PATCH v3 11/19] test-cutils: Refactor qemu_strtosz tests for less boilerplate, Eric Blake, 2023/05/22
- [PATCH v3 13/19] numa: Check for qemu_strtosz_MiB error, Eric Blake, 2023/05/22
- [PATCH v3 17/19] cutils: Use parse_uint in qemu_strtosz for negative rejection, Eric Blake, 2023/05/22
- [PATCH v3 15/19] cutils: Set value in all qemu_strtosz* error paths, Eric Blake, 2023/05/22
- [PATCH v3 18/19] cutils: Improve qemu_strtod* error paths, Eric Blake, 2023/05/22
- [PATCH v3 19/19] cutils: Improve qemu_strtosz handling of fractions, Eric Blake, 2023/05/22