Re: [Paparazzi-devel] Strange problem with CPPM reciever

[Pascal Fust]

What I was struggling at first with my Taranis & X8R was, that I needed to define in the radio XML exactly the total number of channels the receiver was setup up for (16 channels in my configuration), i.e. even the channels I didn't need at all had to be defined by dummies. Otherwise nothing worked at all...

Pascal

2016-04-18 17:20 GMT+02:00 Helge Walle <address@hidden>:

Hi Amir,

Here is the radio file that works with my Taranis Tx and D8R-XP Rx with cppm output.

The file has 8 channels and so I believe is the cppm output of your Rx.

For the Lisa/M 2.0 I have in the airframe file:

<subsystem name="radio_control" type="ppm">
   <configure name="RADIO_CONTROL_PPM_PIN" value="UART1_RX"/>
</subsystem>

Helge.

2016-04-18 16:07 GMT+02:00 Felix Ruess <address@hidden>:

As it says in the wiki, the radio control xml file is not used for
receivers with serial ouput (that includes SBus).
Please follow https://wiki.paparazziuav.org/wiki/Radio_Control#Measuring_the_PPM_time_values
and write a radio xml file with correct number of PPM ouput channels
and timings.

On Mon, Apr 18, 2016 at 3:58 PM, amir hossein <address@hidden> wrote:
> Dear Felix,
> I before used this radio (FrskyX9D) and its X8R receiver (Sbus) with
> available .xml file with Apogee successfully. But for LisaMv2 I tried with
> frsky XSR (CPPM) and the same .xml radio file. In addition, I tried both
> POSITIVE and NEGATIVE in pulse_type, but it doesnt work yet. No radio
> commands (RC and ppm in messages) are transformed.
>
>
> On Monday, April 18, 2016 5:31 PM, Felix Ruess <address@hidden>
> wrote:
>
>
> Hi Amir,
>
> did you use a matching radio control file for your receiver?
> See https://wiki.paparazziuav.org/wiki/Radio_Control
>
> Cheers, Felix
>
> On Mon, Apr 18, 2016 at 11:35 AM, amirhtbt <address@hidden> wrote:
>> Dear Pascal,
>> I Tried it in all the way; UART1, UART5 and servo output, but it doesnt
>> work!!
>>
>> Does anyone know about the compatibility of these futaba radios with
>> LisaMV2? Now I have problem with cppm reciever:
>>
>> futaba 14SG
>> futaba 8FG
>> futaba 10J
>> futaba 8J
>> futaba 4YF
>>
>> Tnx alot
>> Amir
>>
>>
>>
>> --
>> View this message in context:
>> http://lists.paparazziuav.org/Strange-problem-with-CPPM-reciever-tp17911p17913.html
>> Sent from the paparazzi-devel mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel