Re: [Paparazzi-devel] Strange problem with CPPM reciever

[amir hossein]

I didnt understand it!

My XSR reciever has 8 output channel (cppm) and I use following in my radio file.

<radio name="FrSky X9D + X8R receiver SBus connection" data_min="900" data_max="2100" sync_min ="5000" sync_max ="15000" pulse_type="POSITIVE">

 <channel ctl="B" function="ROLL"     min="990" neutral="1503" max="2011" average="0"/>

 <channel ctl="C" function="PITCH"    min="2011" neutral="1498" max="987" average="0"/>

 <channel ctl="D" function="YAW"      min="990" neutral="1500" max="2011" average="0"/>

 <channel ctl="A" function="THROTTLE" min="998" neutral="998" max="2011" average="0"/>

 <channel ctl="G" function="UNUSED"    min="2050" neutral="1500" max="950" average="1"/>

 <channel ctl="F" function="GAIN1"     min="2050" neutral="1496" max="948" average="1"/>

 <channel ctl="PHAUX2" function="MODE"    min="2011" neutral="1500" max="987" average="1"/> <!-- mode switch is on channel 7 -->

</radio>

Also I added "RC" and "PPM" in my telemetry .xml file with 0.5 sec period but no data appeare in messages.

On Monday, April 18, 2016 6:37 PM, Felix Ruess <address@hidden> wrote:

As it says in the wiki, the radio control xml file is not used for
receivers with serial ouput (that includes SBus).
Please follow https://wiki.paparazziuav.org/wiki/Radio_Control#Measuring_the_PPM_time_values
and write a radio xml file with correct number of PPM ouput channels
and timings.

On Mon, Apr 18, 2016 at 3:58 PM, amir hossein <address@hidden> wrote:
> Dear Felix,
> I before used this radio (FrskyX9D) and its X8R receiver (Sbus) with
> available .xml file with Apogee successfully. But for LisaMv2 I tried with
> frsky XSR (CPPM) and the same .xml radio file. In addition, I tried both
> POSITIVE and NEGATIVE in pulse_type, but it doesnt work yet. No radio
> commands (RC and ppm in messages) are transformed.
>
>
> On Monday, April 18, 2016 5:31 PM, Felix Ruess <address@hidden>
> wrote:
>
>
> Hi Amir,
>
> did you use a matching radio control file for your receiver?
> See https://wiki.paparazziuav.org/wiki/Radio_Control
>
> Cheers, Felix
>
> On Mon, Apr 18, 2016 at 11:35 AM, amirhtbt <address@hidden> wrote:
>> Dear Pascal,
>> I Tried it in all the way; UART1, UART5 and servo output, but it doesnt
>> work!!
>>
>> Does anyone know about the compatibility of these futaba radios with
>> LisaMV2? Now I have problem with cppm reciever:
>>
>> futaba 14SG
>> futaba 8FG
>> futaba 10J
>> futaba 8J
>> futaba 4YF
>>
>> Tnx alot
>> Amir
>>
>>
>>
>> --
>> View this message in context:
>> http://lists.paparazziuav.org/Strange-problem-with-CPPM-reciever-tp17911p17913.html
>> Sent from the paparazzi-devel mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>