[Paparazzi-devel] Using Paparazzi with Parrot Rolling Spider

[Matthew Samuel Berk]

Hey all,

Initially posted this on gitter but figured this is probably a better venue for 
it.

New to paparazzi and am trying to get it working on a Rolling Spider we have in 
the lab for some controls research but have had minimal success. It's shown on 
the wiki and I can telnet onto it from Ubuntu but have not had success with 
actually uploading from Paparazzi Center. I looked at the rollingspider branch 
from the TUdelft repo but still no luck.

When I attempt upload I get the following error in the output window:

----
Could not connect to Parrot UAV (host: 192.168.2.1)
make[1]: *** [upload] Error 2
make[1]: Leaving directory `/home/matthew/paparazzi/sw/airborne'
make: *** [ap.upload] Error 2
make: Leaving directory `/home/matthew/paparazzi’
----

but I can connect via telnet to 192.168.2.1
This is with using the "bebop" airframe from the aforementioned rollingspider 
branch which appears to be what was used. There is no "rollingspider" airframe 
and most of the edits on that branch involve the bebop one.

Also, I am using Ubuntu inside of VMware Fusion 7.1.2 from a Macbook Pro if 
that is known to have issues.

Thanks,
-Matthew