Re: [Paparazzi-devel] Blank GCS with Lisa/S

[Samuel Comeau]

Hello Beryl,

I have looked at your screenshot, but the resolution isn't very good, so I 
can't read the output of "$ dmesg | tail". You may copy paste it instead.

If you want to read telemetry through the BMP, you have to use it's UART 
capabilities, so you need to connect it to the UART of your Lisa/S. The BMP is 
listed as two devices, one is for flashing (SWD) and the other is for telemetry 
(UART).

Sam

On March 3, 2015 09:29:05 PM beryl.wicaksono wrote:
> Here the screen shot after the GCS starting.
> <http://lists.paparazziuav.org/file/n16852/Screenshot%2520from%25202015-03-0
> 3%2520195312_zpsci8zdy0g.png> Is there any something wrong?
> 
> How's the setup of the hardware? So I just connect BMP to Lisa/S via SWD
> port (like flashing)?
> 
> Yes, I have setup the DX6i 's modulation to DSM2.
> 
> Thank you,
> 
> Beryl
> 
> 
> Garrosh wrote
> 
> > Hello Beryl,
> > 
> > First, I'd like to ask you to post the output of "dmesg | tail" just after
> > you've started your GCS.
> > 
> > When talking to the Lisa via BMP, you have at least 2 options: through gdb
> > or
> > through paparazzi. To simplify the diagnosing process, I'd recommend using
> > gdb
> > to upload and run your code on the Lisa S, see here :
> > http://wiki.paparazziuav.org/wiki/DevGuide/JTAG-Debug
> > 
> > Next, you may try to run your code with paparazzi through your BMP, you
> > can
> > look here for more information :
> > http://wiki.paparazziuav.org/wiki/Subsystem/telemetry
> > 
> > Your usbrf is running on DSM2, but your controller may not. Did you verify
> > that you set your controller too?
> > 
> > In the link about the telemetry, it also tells you about baudrate.
> > 
> > Good luck!
> > 
> > Sam
> > On March 3, 2015 07:01:26 AM beryl.wicaksono wrote:
> > _______________________________________________
> > Paparazzi-devel mailing list
> > 
> > Paparazzi-devel@
> > 
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> -----
> Beryl Wicaksono
> Electrical Engineering
> Bandung Institute of Technology
> --
> View this message in context:
> http://lists.paparazziuav.org/Blank-GCS-with-Lisa-S-tp16839p16852.html Sent
> from the paparazzi-devel mailing list archive at Nabble.com.
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel