Re: [Paparazzi-devel] Problem locating gcc-arm-none-eabi

Hi Chris,

sudo echo $PATH is not the same as the PATH of root...

You could do something like

sudo su -

if arm gccnot in path:

export PATH=/opt/gcc-arm-none-eabi-4_7-2013q2/bin:$PATH

run the upload...

Better fix your udev permissions, check with which vendor and product id your board registers itself and then add an appropriate udev rule.

First check which device you get when connecting the board, then run:

udevadm info --query=all --attribute-walk --name=/dev/your_board

What you need to add at the end is probably something:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE:="0666"

See also https://wiki.paparazziuav.org/wiki/Udev

Cheers, Felix

On Wed, Oct 29, 2014 at 4:50 PM, Chris <address@hidden> wrote:

Hi Felix.
No matter what i do it just wont find the file "arm-none-eabi-gcc-4.7.4" as root but it can find it alright as a normal user in ubuntu 12.04
I am using dfu-util 0.8 in order to program the olimex stm32f405 board using the stm32's built in bootloader.
I can program it fine as root but not as a user, in fact i never found a solution in this problem.
Below are the various iterations i tried:

with sudo
address@hidden:~$ sudo arm-none-eabi-gcc-4.7.4
[sudo] password for hendrix:
sudo: arm-none-eabi-gcc-4.7.4: command not found

as root but specifying the whole path (ok)
address@hidden:~$ sudo /opt/gcc-arm-none-eabi-4_7-2013q2/bin/arm-none-eabi-gcc-4.7.4
arm-none-eabi-gcc-4.7.4: fatal error: no input files
compilation terminated.

as a normal user (ok)
address@hidden:~$ arm-none-eabi-gcc-4.7.4
arm-none-eabi-gcc-4.7.4: fatal error: no input files
compilation terminated.

address@hidden:~$ echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/gcc-arm-none-eabi-4_7-2013q2/bin
address@hidden:~$ sudo echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/gcc-arm-none-eabi-4_7-2013q2/bin
address@hidden:~$ sudo /opt/gcc-arm-none-eabi-4_7-2013q2/bin/arm-none-eabi-gcc-4.7.4
arm-none-eabi-gcc-4.7.4: fatal error: no input files
compilation terminated.
address@hidden:~$

On 10/29/2014 05:26 PM, Felix Ruess wrote:
Hi Chris,

you need to add the cross compiler to your PATH.
export PATH=/opt/gcc-arm-none-eabi-4_7-2013q2/bin:$PATH
You probably did that by adding it to your PATH in ~/.profile so it is always added as normal user (you could add the same file in /root).

Or better fix your permissions/udev rules to allow flashing as normal user.

What device/programmer are you using?

Cheers, Felix

On Wed, Oct 29, 2014 at 3:25 PM, Chris <address@hidden> wrote:

Hi.
I am trying to update everything in my computer and transfer my code to the newest master (just cloned it) and so far i got everything working with one exception.
If i use pararazzi as a normal user paparazzi center can find gcc-arm-none-eabi located in /opt/gcc-arm-none-eabi-4_7-2013q2/bin but if i launch paparazzi center as root it gives me this error.

/home/hendrix/paparazzi/conf/Makefile.arm-embedded-toolchain:29: *** Error: arm-none-eabi-gcc cross-compiler not found! Recommended toolchain is https://launchpad.net/gcc-arm-embedded. Stop.
make[1]: Leaving directory `/home/hendrix/paparazzi/sw/airborne'
make: *** [ap.compile] Error 2

The problem affects me because whatever i do i just can't flash stm32f4 boards using dfu-util as a user, only as root.
Chris

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

From:	Chris
Subject:	Re: [Paparazzi-devel] Problem locating gcc-arm-none-eabi
Date:	Wed, 29 Oct 2014 18:38:29 +0200
User-agent:	Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Thunderbird/31.2.0