Re: [Paparazzi-devel] XBee with Paparazzi

[Simon Liebold]

John,

If the GCS window stays at "waiting for telemetry" and the screen remains black have a look at the Paparazzi Center (from where you started the session). Did the "Data Link" terminate immediately? Is there any error indicating that it had trouble opening a device?

For example:

Also (assuming this is Linux) do a

$ tail -f /var/log/syslog

and see if the new device is being created as you plug in the ground station in the USB port (and likewise being removed as you unplug it).


Simon


Am 01.10.2014 um 23:18 schrieb John Voegeli:

Quick question… I am almost finished with my quad, I am just having trouble getting the Xbees to link up. I configured them to 57600 baud and the GCS is the coordinator and the Quad is the end unit… I also made sure my Udev rules matched up so I could use the Xbee from the dropdown list in the GCS. However, It continues to say waiting for telemetry and never links up.

 

When using X-CTU in windows I can see the other device and get some RSSI light and activity, but when plugged into Ubuntu there is no traffic. I am using the FTDI usb to serial so I know the drivers are right. Any ideas at all?

 

~JV

 

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel