paparazzi-devel
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[Paparazzi-devel] BMP barometer readings.
From
:
Helge Walle
Subject
:
[Paparazzi-devel] BMP barometer readings.
Date
:
Wed, 3 Sep 2014 15:54:01 +0200
Hi,
This may only be a detail:
If I omit
SENSOR_SYNC_SEND from my airframe file while having defined the baro_bmp module, I get a warning when compiling.
Still I get the BMP_STATUS message, because
RunOnceEvery
() is activated i
n baro_bmp.c if
SENSOR_SYNC_SEND is not defined.
Is this as it should be? It has been like this for a long time.
Thanks,
Helge.
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
[Paparazzi-devel] BMP barometer readings.
,
Helge Walle
<=
Re: [Paparazzi-devel] BMP barometer readings.
,
Felix Ruess
,
2014/09/03
Prev by Date:
Re: [Paparazzi-devel] Problem with ADC-6 with Lisa M 2 similar configuration
Next by Date:
Re: [Paparazzi-devel] BMP barometer readings.
Previous by thread:
Re: [Paparazzi-devel] What does the effect of feedforward(DD gain) in rotorcraft configuration
Next by thread:
Re: [Paparazzi-devel] BMP barometer readings.
Index(es):
Date
Thread