Re: [Paparazzi-devel] Could not find STM32 device

On Fri, Jul 25, 2014 at 11:11 PM, Felix Ruess <address@hidden> wrote:

We probably don't want to match all devices that use an OpenMoko id, as they are use by quite a lot of devices...

On Fri, Jul 25, 2014 at 11:05 PM, Piotr Esden-Tempski <address@hidden> wrote:

Yes it probably makes sense. We could also just match the product and vendor ID. That is also an option.

On Jul 25, 2014, at 13:59, Felix Ruess <address@hidden> wrote:

> Or we just leave out the manufacturer in the udev rules, should be enough to just match on the product name...
>
>
> On Fri, Jul 25, 2014 at 10:51 PM, Piotr Esden-Tempski <address@hidden> wrote:
> Yes something like that.
>
> Added the appropriate patch to the pull request:
> https://github.com/paparazzi/paparazzi/pull/778
>
> I used a wildcard for the version number, to make it forward/backward compatible:
> https://github.com/esden/paparazzi/commit/b5e973655c1c27ad72bbfacc72637c1ac2ec8e91
>
>
> On Jul 25, 2014, at 13:48, John Voegeli <address@hidden> wrote:
>
> > So something like:
> >
> > ATTR{manufacturer}==“1 BIT SQUARED", ATTR{product}=="Lisa/M V2.1
> > (Upgrade)*", GROUP="plugdev"
> >
> >
> > On 7/25/14, 4:46 PM, "Piotr Esden-Tempski" <address@hidden> wrote:
> >
> >> Yes "1 BIT SQUARED" should be added to the udev script too.
> >>
> >> On Jul 25, 2014, at 13:39, John Voegeli <address@hidden> wrote:
> >>
> >>> Piotr that is what I get as well. The udev rule looks like this (default
> >>> from vanilla version of Paparazzi):
> >>>
> >>> ATTR{manufacturer}=="Transition Robotics Inc.", ATTR{product}=="Lisa/M
> >>> (Upgrade)*", GROUP=³plugdev"
> >>>
> >>> Should it be different to match? I am not very good with udev rules.
> >>>
> >>>
> >>>
> >>> On 7/25/14, 4:25 PM, "Piotr Esden-Tempski" <address@hidden> wrote:
> >>>
> >>>> Just to make sure this is the output I am getting connecting a Lisa/M:
> >>>>
> >>>> $ sudo lsusb -v
> >>>> [snip]
> >>>> Bus 003 Device 002: ID 1d50:600f OpenMoko, Inc.
> >>>> Device Descriptor:
> >>>> bLength 18
> >>>> bDescriptorType 1
> >>>> bcdUSB 2.00
> >>>> bDeviceClass 0 (Defined at Interface level)
> >>>> bDeviceSubClass 0
> >>>> bDeviceProtocol 0
> >>>> bMaxPacketSize0 64
> >>>> idVendor 0x1d50 OpenMoko, Inc.
> >>>> idProduct 0x600f
> >>>> bcdDevice 1.00
> >>>> iManufacturer 1 1 BIT SQUARED
> >>>> iProduct 2 Lisa/M V2.1 (Upgrade) V1.1
> >>>> iSerial 3 LM21005 35FFDC053256383336622143
> >>>> bNumConfigurations 1
> >>>> Configuration Descriptor:
> >>>> bLength 9
> >>>> bDescriptorType 2
> >>>> wTotalLength 27
> >>>> bNumInterfaces 1
> >>>> bConfigurationValue 1
> >>>> iConfiguration 0
> >>>> bmAttributes 0xc0
> >>>> Self Powered
> >>>> MaxPower 100mA
> >>>> Interface Descriptor:
> >>>> bLength 9
> >>>> bDescriptorType 4
> >>>> bInterfaceNumber 0
> >>>> bAlternateSetting 0
> >>>> bNumEndpoints 0
> >>>> bInterfaceClass 254 Application Specific Interface
> >>>> bInterfaceSubClass 1 Device Firmware Update
> >>>> bInterfaceProtocol 2
> >>>> iInterface 4 @Internal Flash /0x08000000/4*002Ka,124*002Kg
> >>>> Device Firmware Upgrade Interface Descriptor:
> >>>> bLength 9
> >>>> bDescriptorType 33
> >>>> bmAttributes 9
> >>>> Will Detach
> >>>> Manifestation Intolerant
> >>>> Upload Unsupported
> >>>> Download Supported
> >>>> wDetachTimeout 255 milliseconds
> >>>> wTransferSize 2048 bytes
> >>>> bcdDFUVersion 1.1a
> >>>> Device Status: 0x0000
> >>>> (Bus Powered)
> >>>> [snip]
> >>>>
> >>>> OpenMoko is correct. We are using the free device IDs generously
> >>>> provided by OpenMoko.
> >>>>
> >>>> Cheers,
> >>>> Piotr
> >>>>
> >>>> On 07/25/2014 12:47 PM, John Voegeli wrote:
> >>>>> Yes Felix I sure do. I originally has a bad cable causing it not to
> >>>>> power correctly, but since then it does the cylon flashing pattern
> >>>>> when plugged in USB.
> >>>>>
> >>>>>
> >>>>> Sent from my iPhone
> >>>>>
> >>>>> On Jul 25, 2014, at 15:42, "Felix Ruess" <address@hidden
> >>>>> <mailto:address@hidden>> wrote:
> >>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> the board does not seem to be in bootloader mode, it should show up
> >>>>>> as Lisa/M
> >>>>>> Do you see the LEDs flashing like this
> >>>>>> https://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Using_luftboot ?
> >>>>>>
> >>>>>> Cheers, Felix
> >>>>>>
> >>>>>>
> >>>>>> On Fri, Jul 25, 2014 at 5:52 PM, John Voegeli <address@hidden
> >>>>>> <mailto:address@hidden>> wrote:
> >>>>>>
> >>>>>> Does not work with sudo either. Tried that last night I thought
> >>>>>> maybe a permissions issues as well. It just says it cannot find
> >>>>>> it.
> >>>>>>
> >>>>>> From: AFISH <address@hidden
> >>>>>> <mailto:address@hidden>>
> >>>>>> Reply-To: Paparazzi UAV devel list <address@hidden
> >>>>>> <mailto:address@hidden>>
> >>>>>> Date: Friday, July 25, 2014 at 11:47 AM
> >>>>>> To: Paparazzi UAV devel list <address@hidden
> >>>>>> <mailto:address@hidden>>
> >>>>>> Cc: Paparazzi UAV devel list <address@hidden
> >>>>>> <mailto:address@hidden>>
> >>>>>>
> >>>>>> Subject: Re: [Paparazzi-devel] Could not find STM32 device
> >>>>>>
> >>>>>> Try to run sudo ./paparazzi, if you get link established, it will
> >>>>>> shows you need add to some group
> >>>>>> ‹
> >>>>>> Sent from Mailbox <https://www.dropbox.com/mailbox> for iPhone
> >>>>>>
> >>>>>>
> >>>>>> On Fri, Jul 25, 2014 at 10:16 AM, John Voegeli
> >>>>>> <address@hidden <mailto:address@hidden>> wrote:
> >>>>>>
> >>>>>> Yes I have permission I followed those steps... Here is the
> >>>>>> output for the device that shows up when plugging in the Lisa
> >>>>>> M to USB.
> >>>>>>
> >>>>>> Bus 002 Device 003: ID 1d50:600f OpenMoko, Inc.
> >>>>>> Couldn't open device, some information will be missing
> >>>>>> Device Descriptor:
> >>>>>> bLength 18
> >>>>>> bDescriptorType 1
> >>>>>> bcdUSB 2.00
> >>>>>> bDeviceClass 0 (Defined at Interface level)
> >>>>>> bDeviceSubClass 0
> >>>>>> bDeviceProtocol 0
> >>>>>> bMaxPacketSize0 64
> >>>>>> idVendor 0x1d50 OpenMoko, Inc.
> >>>>>> idProduct 0x600f
> >>>>>> bcdDevice 1.00
> >>>>>> iManufacturer 1
> >>>>>> iProduct 2
> >>>>>> iSerial 3
> >>>>>> bNumConfigurations 1
> >>>>>> Configuration Descriptor:
> >>>>>> bLength 9
> >>>>>> bDescriptorType 2
> >>>>>> wTotalLength 27
> >>>>>> bNumInterfaces 1
> >>>>>> bConfigurationValue 1
> >>>>>> iConfiguration 0
> >>>>>> bmAttributes 0xc0
> >>>>>> Self Powered
> >>>>>> MaxPower 100mA
> >>>>>> Interface Descriptor:
> >>>>>> bLength 9
> >>>>>> bDescriptorType 4
> >>>>>> bInterfaceNumber 0
> >>>>>> bAlternateSetting 0
> >>>>>> bNumEndpoints 0
> >>>>>> bInterfaceClass 254 Application Specific Interface
> >>>>>> bInterfaceSubClass 1 Device Firmware Update
> >>>>>> bInterfaceProtocol 2
> >>>>>> iInterface 4
> >>>>>> Device Firmware Upgrade Interface Descriptor:
> >>>>>> bLength 9
> >>>>>> bDescriptorType 33
> >>>>>> bmAttributes 9
> >>>>>> Will Detach
> >>>>>> Manifestation Intolerant
> >>>>>> Upload Unsupported
> >>>>>> Download Supported
> >>>>>> wDetachTimeout 255 milliseconds
> >>>>>> wTransferSize 2048 bytes
> >>>>>> bcdDFUVersion 1.1a
> >>>>>>
> >>>>>>
> >>>>>> ________________________________________
> >>>>>> From:
> >>>>>> paparazzi-devel-bounces+jvoegeli=address@hidden
> >>>>>>
> >>>>>> <mailto:paparazzi-devel-bounces+jvoegeli=address@hidden>
> >>>>>> <paparazzi-devel-bounces+jvoegeli=address@hidden
> >>>>>>
> >>>>>> <mailto:paparazzi-devel-bounces+jvoegeli=address@hidden>>
> >>>>>> on behalf of Piotr Esden-Tempski <address@hidden
> >>>>>> <mailto:address@hidden>>
> >>>>>> Sent: Friday, July 25, 2014 3:18 AM
> >>>>>> To: Paparazzi UAV devel list
> >>>>>> Subject: Re: [Paparazzi-devel] Could not find STM32 device
> >>>>>>
> >>>>>> Hi John,
> >>>>>>
> >>>>>> Do you have permissions to access the DFU device?
> >>>>>>
> >>>>>>
> >>>>>> http://wiki.paparazziuav.org/wiki/Installation/Linux#Udev_rules
> >>>>>>
> >>>>>> If you run lsusb -v is the Lisa/M listed?
> >>>>>>
> >>>>>> Cheers,
> >>>>>> Piotr
> >>>>>>
> >>>>>> On Jul 24, 2014, at 20:57, John Voegeli
> >>>>>> <address@hidden <mailto:address@hidden>>
> >>>>>> wrote:
> >>>>>>
> >>>>>>> Hey all,
> >>>>>>>
> >>>>>>> Sorry if this has been answered before. I googled and
> >>>>>> searched all over the site and could not find anything. I
> >>>>>> have the new Lisa M 2.1 and I am trying to flash it however I
> >>>>>> keep getting Could not find STM32 (autopilot) device Failed
> >>>>>> messages. I have tried everything and am at a loss. Any
> >>>>>> suggestions?
> >>>>>>> _______________________________________________
> >>>>>>> Paparazzi-devel mailing list
> >>>>>>> address@hidden
> >>>>>> <mailto:address@hidden>
> >>>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Paparazzi-devel mailing list
> >>>>>> address@hidden <mailto:address@hidden>
> >>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Paparazzi-devel mailing list
> >>>>>> address@hidden <mailto:address@hidden>
> >>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Paparazzi-devel mailing list
> >>>>>> address@hidden <mailto:address@hidden>
> >>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Paparazzi-devel mailing list
> >>>>>> address@hidden <mailto:address@hidden>
> >>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Paparazzi-devel mailing list
> >>>>> address@hidden
> >>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Paparazzi-devel mailing list
> >>>> address@hidden
> >>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>>
> >>>
> >>> _______________________________________________
> >>> Paparazzi-devel mailing list
> >>> address@hidden
> >>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >>
> >>
> >> _______________________________________________
> >> Paparazzi-devel mailing list
> >> address@hidden
> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

From:	Felix Ruess
Subject:	Re: [Paparazzi-devel] Could not find STM32 device
Date:	Fri, 25 Jul 2014 23:19:56 +0200