[Paparazzi-devel] What the meaning of "STABILIZATION_ATTITUDE" section in XML configure file

[Eltonwu]

    I'm new to paparazziUAV. Currently,I'm able to flash the software to the
board and the rotorcraft can fly basically. Although the rotorcarft has some
oscillation when flying.I think the parameters of attitude PID is not tuned
well.Do you have some experience of tuning PID ?

    By the way, what the meaning of following parameters ?
    
    in File "quadrotor_lisa_m_2_pwm_spektrum.xml" Section
"STABILIZATION_ATTITUDE "

    
    <define name="REF_OMEGA_P"  value="800" unit="deg/s"/>
    <define name="REF_ZETA_P"   value="0.85"/>
    <define name="REF_MAX_P"    value="400." unit="deg/s"/>
    <define name="REF_MAX_PDOT" value="RadOfDeg(8000.)"/>

    <define name="REF_OMEGA_Q"  value="800" unit="deg/s"/>
    <define name="REF_ZETA_Q"   value="0.85"/>
    <define name="REF_MAX_Q"    value="400." unit="deg/s"/>
    <define name="REF_MAX_QDOT" value="RadOfDeg(8000.)"/>

    <define name="REF_OMEGA_R"  value="500" unit="deg/s"/>
    <define name="REF_ZETA_R"   value="0.85"/>
    <define name="REF_MAX_R"    value="180." unit="deg/s"/>
    <define name="REF_MAX_RDOT" value="RadOfDeg(1800.)"/>



    Any answer will be appreciated !!!



--
View this message in context: 
http://lists.paparazziuav.org/What-the-meaning-of-STABILIZATION-ATTITUDE-section-in-XML-configure-file-tp15753.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.