Re: [Paparazzi-devel] Raspi GCS

Running sw/ground_segment/tmtc/link e receive the message "Bus error"

From: address@hidden
To: address@hidden
Date: Wed, 17 Apr 2013 23:55:28 -0300
Subject: Re: [Paparazzi-devel] Raspi GCS

paparazzy terminal return this after i restart datalink

Run '/home/pi/paparazzi/sw/ground_segment/tmtc/link -d /dev/ttyUSB0 -s 57600'

DONE (exec /home/pi/paparazzi/sw/ground_segment/tmtc/link -d /dev/ttyUSB0 -s 57600 2>&1)

From: address@hidden
To: address@hidden
Date: Wed, 17 Apr 2013 23:42:42 -0300
Subject: Re: [Paparazzi-devel] Raspi GCS

Well, i installed minicom and configured to ttyUSB0.
terminal are receiving the messages from AP.

From: address@hidden
To: address@hidden
Date: Wed, 17 Apr 2013 23:28:03 -0300
Subject: Re: [Paparazzi-devel] Raspi GCS

What do you mean by RAW terminal ?
is a terminal connected to USB0 ?
if yes, how i do this on linux ?

Date: Wed, 17 Apr 2013 20:24:22 -0600
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] Raspi GCS

Hi Eduardo,

What kind of serial to usb converter is it? Also, does it work just running it into a raw terminal (without the Link agent)?

I have never actually run a real aircraft on the RasPi, only simulation...

Thanks,

-Stephen Dwyer

On Wed, Apr 17, 2013 at 8:18 PM, Eduardo lavratti <address@hidden> wrote:

Anyone using GCS with raspbery pi ?

Yesterday i tried to use but DATALINK process stop everytime data comes from autopilot.
If i turnoff autopilot the datalink stay active.

my datalink is serial 57.6k (Serial to USB)

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

From:	Eduardo lavratti
Subject:	Re: [Paparazzi-devel] Raspi GCS
Date:	Thu, 18 Apr 2013 00:03:38 -0300