Re: [Paparazzi-devel] Booz Upload misery

[Eric Parsonage]

Hi All

This was my son posting (same name).  He was just using the wrong port for 
uploading all is well now.

Regards

Eric Parsonage (Snr).

On 22/05/2010, at 8:16 PM, Eric Parsonage wrote:

> Hey all, particularly booz-ers
> 
> Thanks to Antoine, I was recently able to get my hands on a set of
> booz boards. I haven't got a platform to put them on yet, so I thought
> I would try some HITL, Antoine's code was still in the board so they
> booted up and the LEDs flashed away. I then tried to upload the
> HITL_USB aircraft to the board (yeah, I realise this was the wrong
> thing to do) so I reboot the board and it has clearly written
> something as I get no LED, and no response from it either. I have now
> tried to get the Booz2_a1 airborne code back onto it, and I get to the
> end of the build and it starts up the ISP, but is unable to write to
> the board. Is it possible that I could have blanked the USB boot
> loader? If so what do I need to do to get the boot loader back on with
> the booz? If not, is there something I have missed, since the system
> outputs the same whether or not the board is plugged in, even though
> dmesg still tells me whether its attached or unattached.
> 
> Regards and thanks,
> 
> Eric
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel