Re: [Paparazzi-devel] spectrum

[antoine drouin]

Hello Eidanm

The code for using spektrum receivers is in the svn tree and will work
an any supported paparazzi architecture ( including TWOG)
One problem with TWOG or other LPC2148 based autopilots is the
availability of only two UARTS ( serial port ) which are usually
occupied by the GPS and the radio modem ( xbee )
There is the possibility of writting code to implement a software UART
but that would have the drawback of putting quite a load on the
processor ( spektrum rx talk at 115200 baud).
Another possibility would be to use a UART/SPI converter

Regards

Poine

2010/5/17 עידן מנדלסון <address@hidden>:
> hi Friends
>
> i was wandering did any one tried to use the spectrum satellite receiver on
> the twog circuits?
>
> if same one did i would be very happy to learn about it
>
> thanks happy fighting
>
> eidan
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>