Re: [Paparazzi-devel] incompatible libgcc building on 64bit ubuntu?

[David Carlson]

It was difficult to get it running on 64-bit Ubuntu and I ended up doing 
as Nathan advises and running 32-bit Ubuntu.  I did so within a VM 
without issue.  In fact, I think there's an image floating around that's 
already set up as well.

Buzz

On 05/13/2010 07:50 AM, Nathan Aherne wrote:
> Use 32 bit ubuntu
>
> Sent from my iPhone
>
> On 13/05/2010, at 1:54 PM, James Peverill <address@hidden> 
> wrote:
>
> > I searched but didn't find any other folks with this issue.  I have 
> > been using PPZ for a while now but have never managed to get it to 
> > build on my primary machine (64 bit Ubuntu Karmic 9.10).
> >
> > I have gcc-arm-none-eabi, binutils-arm-none-eabi and 
> > newlib-arm-none-eabi installed.  I can build and run the Paparazzi 
> > Center but when i try to build the aircraft firmware (ap.upload) I get:
> > /usr/lib/gcc/arm-none-eabi/4.4.3/../../../../arm-none-eabi/bin/ld: 
> > skipping incompatible /usr/lib/gcc/arm-none-eabi/4.4.3/libgcc.a when 
> > searching for -lgcc
> > /usr/lib/gcc/arm-none-eabi/4.4.3/../../../../arm-none-eabi/bin/ld: 
> > cannot find -lgcc
> >
> > Anyone else encounter and hopefully fix this issue?  I have a feeling 
> > it is just a dependency issue but so far I haven't been able to track 
> > it down.  Any tips greatly appreciated!
> >
> >
> > James
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel