Re: [Paparazzi-devel] XBEE PRO ZB

[Eric Parsonage]

Felix

Thanks. I have it fixed now.  I had a number of conflicting things happening. 

Eric

On 09/05/2010, at 8:01 PM, Felix Ruess wrote:

> Hi Eric,
> 
> I just set the xbees using the FTDI usb adapter. I suspect you have
> one as well for the ground station side?
> After that you definitely don't need hardware handshaking for them to
> work on booz.
> 
> Also since you are using the newer ZB (formerly series 2) and not the
> 802.15.4 ones you will also have to program one as a coordinator and
> the other(s) as routers or end-devices. See
> http://paparazzi.enac.fr/wiki/Modems#Digi_XBee_Pro_ZB
> 
> Cheers, Felix
> 
> On Sun, May 9, 2010 at 3:59 AM, Eric Parsonage <address@hidden> wrote:
>> Hi Antoine
>> 
>> I have found that I can only program the xbee with hardware handshaking 
>> enabled. But the booz board doesn't use hardware handshaking. (it only 
>> suplies power and rx/tx) so I am thinking I need to change the D7-DI07 
>> D6-D6-DI06 settings on the xbee using X-CTU.
>> 
>>  Currently D7-DI07 is set to 1 (CTS FLOW CONTROL) and  D6-D6-DI06 is set to 
>> 0 (DISABLE) can you let me know what these settings should be ?
>> 
>> Regards
>> 
>> Eric
>> 
>> 
>> 
>> 
>> 
>> On 09/05/2010, at 11:17 AM, antoine drouin wrote:
>> 
>>> Hi Eric
>>> 
>>> The only thing I change on my xbees is the baudrate - I think they
>>> come configured at 9.6k and I switch them to 57.6k
>>> 
>>> Seeya
>>> 
>>> Poine
>>> 
>>> On Sun, May 9, 2010 at 2:55 AM, Eric Parsonage <address@hidden> wrote:
>>>> Hi All,
>>>> 
>>>> My first time using XBEEs as telemetry link. Can anybody give me some 
>>>> instructions on what to set in their configuration ?
>>>> 
>>>> BTW this is for a booz board.
>>>> 
>>>> Regards
>>>> 
>>>> Eric Parsonage (Snr)
>>>> 
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden
>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> 
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel