Re: [Paparazzi-devel] XBEE PRO ZB

[Felix Ruess]

Hi Eric,

I just set the xbees using the FTDI usb adapter. I suspect you have
one as well for the ground station side?
After that you definitely don't need hardware handshaking for them to
work on booz.

Also since you are using the newer ZB (formerly series 2) and not the
802.15.4 ones you will also have to program one as a coordinator and
the other(s) as routers or end-devices. See
http://paparazzi.enac.fr/wiki/Modems#Digi_XBee_Pro_ZB

Cheers, Felix

On Sun, May 9, 2010 at 3:59 AM, Eric Parsonage <address@hidden> wrote:
> Hi Antoine
>
> I have found that I can only program the xbee with hardware handshaking 
> enabled. But the booz board doesn't use hardware handshaking. (it only 
> suplies power and rx/tx) so I am thinking I need to change the D7-DI07 
> D6-D6-DI06 settings on the xbee using X-CTU.
>
>  Currently D7-DI07 is set to 1 (CTS FLOW CONTROL) and  D6-D6-DI06 is set to 0 
> (DISABLE) can you let me know what these settings should be ?
>
> Regards
>
> Eric
>
>
>
>
>
> On 09/05/2010, at 11:17 AM, antoine drouin wrote:
>
>> Hi Eric
>>
>> The only thing I change on my xbees is the baudrate - I think they
>> come configured at 9.6k and I switch them to 57.6k
>>
>> Seeya
>>
>> Poine
>>
>> On Sun, May 9, 2010 at 2:55 AM, Eric Parsonage <address@hidden> wrote:
>>> Hi All,
>>>
>>> My first time using XBEEs as telemetry link. Can anybody give me some 
>>> instructions on what to set in their configuration ?
>>>
>>> BTW this is for a booz board.
>>>
>>> Regards
>>>
>>> Eric Parsonage (Snr)
>>>
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>