Re: [Paparazzi-devel] Paparazzi File Download

[antoine drouin]

the rule you're interested in is the following one

all (fake VID 0x7070) LPCUSB devices (access through libusb)
BUS=="usb", SYSFS{idVendor}=="7070", GROUP="plugdev"

it tells the system that it should give group "plugdev" to any "LPCUSB" device
By default the device would be usable only by root ( the administrative account)
WIth this rule, any user belonging to th group "plugdev" is allowed to use it



On Sun, May 9, 2010 at 3:51 AM, Reegan M <address@hidden> wrote:
> I think that the problem might be in the undev rule.
>
> When I follow the process for compiling and flashing the board from the wiki
> this is what I receive:
>
> address@hidden:~$ sudo cp
> $PAPARAZZI_HOME/conf/system/udev/rules/10-paparazzi.rules /etc/udev/rules.d/
> [sudo] password for reegan:
> cp: cannot stat `/conf/system/udev/rules/10-paparazzi.rules': No such file
> or directory
> address@hidden:~$
>
> Here is the location of the file, and the file text itself:
> /home/reegan/paparazzi3/conf/system/udev/rules
>
>
> BUS=="usb", SYSFS{serial}=="*_fbw", NAME="test_fbw",
> SYMLINK="paparazzi/%s{serial}", MODE="0666"
>
> MaxStream xbee pro box
> BUS=="usb", SYSFS{product}=="MaxStream PKG-U", KERNEL=="ttyUSB*",
> SYMLINK+="paparazzi/xbee", GROUP="plugdev"
>
> bare FTDI chip without EEPROM
> BUS=="usb", SYSFS{idVendor}=="0403", SYSFS{idProduct}=="6001",
> KERNEL=="ttyUSB*", SYMLINK+="paparazzi/serial", GROUP="plugdev"
>
>  all (fake VID 0x7070) LPCUSB devices (access through libusb)
> BUS=="usb", SYSFS{idVendor}=="7070", GROUP="plugdev"
>
> FTDI 2232 parallel converter / Amontec JTAG-Tiny (access through libftdi)
> BUS=="usb",  SYSFS{idVendor}=="0403", SYSFS{idProduct}=="cff8",
> GROUP="plugdev"
>
>  make joysticks/gamepads readable on event interface (writeable for force
> feedback), see input_event.sh
> KERNEL=="event*", IMPORT{program}="input_event.sh %p", NAME="input/%k",
> GROUP="plugdev", MODE="0640"
> ENV{FF_DEVICE}=="1", MODE="0660"
>
>
> Race
>
>
>
>
> On Sat, May 8, 2010 at 8:45 PM, antoine drouin <address@hidden> wrote:
>>
>> you could "tail -f /var/log/syslog" when you plug the tiny and see if
>> the usb device gets detected ( should be called lpcusb )
>> the command "lsusb", after the tiny has been connected should also
>> display the lpcusb device
>> if the usb device is really there, you problem could then be be a
>> permission issue.
>> There's a udev rule contained in the file
>> paparazzi3/conf/system/udev/rules/10-paparazzi.rules
>>
>> regards
>>
>> Poine
>>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>