Re: [Paparazzi-devel] Building flight plans

[David Carlson]

Nathan,

I would believe so.  As I understand it, the blocks perform certain 
actions (like figure-8, goto, loiter, etc) on the waypoints.  So if a 
block refers to a waypoint that is not there, you will get an error.

Buzz

On 04/19/2010 04:59 AM, Nathan Aherne wrote:
> Please tell me if I have worked out the issue.
>
> What I did was:
>
> 1. Copy Basic flight plan
> 2. Change some waypoint names in the basic flight plan
> 3. Try to compile
>
> It seems that the change in waypoint names is what is creating the problem. The 
> blocks are looking for specific waypoint names and they are not there so it 
> wont compile.
>
> Is this correct?
>
> Kindest regards,
>
> Nathan Aherne
>
> On 19/04/2010, at 10:03 AM, Chris Gough wrote:
>
>    
> > Hi Nathan,
> >
> > There was a forum, it filled with spam and died. What with IRC, wiki,
> > mailing list and other forums (e.g. rcgroups), it just wasn't very
> > vibrant.
> >
> > Post your broken flight plan (and maybe the last working one too, if
> > you still have it).
> >
> > Chris Gough
> >
> > On Mon, Apr 19, 2010 at 1:26 AM, Nathan Aherne<address@hidden>  wrote:
> >      
> > > Hi,
> > >
> > > I have been testing out Paparazzi for a couple of weeks now and have read most 
> > > of the devel list. I have been able to get simulations to work and I have 
> > > played around with changing a few configurations in waypoints etc.
> > >
> > > I decided to build my own flight plan so I copied the basic flight plan and 
> > > then made some changes to where the map should be (in Australia) and then added 
> > > a couple of way points (over time) using the way point editor. Every time I 
> > > changed something I saved the flight plan and then rebuilt the whole 
> > > simulation. The last time I did this (I moved a way point in waypoint editor) I 
> > > was no longer able to compile the flight plan. When it gets to compiling it it 
> > > just says warn or / or /home, there are no messages about something being wrong.
> > >
> > > I have hardly changed a thing, a couple of waypoints and the originating 
> > > location. Can someone point me to a fix? I would really like to get past this 
> > > silly error so I can continue to build a real flight plan.
> > >
> > > A couple of other things
> > >
> > > Also I noticed that in my build the PFD is back the front. When the aircraft 
> > > turns left the PFD shows it turning right but the 2D map shows it travelling 
> > > left.
> > >
> > > Why do you not have a forum?
> > >
> > > Kindest regards,
> > >
> > > Nathan
> > >
> > > _______________________________________________
> > > Paparazzi-devel mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > >
> > >        
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >      
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>