Thanks for the reply... We got it working finally! Turns out there was some flux remaining inside the usb connector and it was messing up the communicatins on the D+ D- lines. We were finally able to upload all the demos without any issues
Date: Sat, 2 Jan 2010 09:19:02 +0100
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] USB-flashing dont work
Hello Mohammed,
if you have problems with your usb device use the serial way to flash
the controller.
It works fine but with lower speed.
Same years ago same user had probes with the USB connect signal
because the USB voltage was 8V and not 5V.
This level destroyed the pin of the lpc2148.
Sincerely
Heinrich
Mohammed Abukhalid schrieb:
Hello all,
We've been working on putting together a BOOZ prototype as part of a
university project and I was hoping to get your input on a problem we
are currently trying to debug. We got the Booz PCB boards and installed
all the necessary components as of a couple days ago. Everything looked
like its in working order and we were able to successfully compile the
USB bootloader and transfer it to the microcontroller from a linux box
running Ubuntu.
At this point we are simply trying to upload the led test program, but
we cant get that far because for some reason when we connect to the USB
connector on the board the PC does not detect the board. We have
verified the connections and everything seems to be in order. Another
question that comes to mind is the USB Select PIN is, as I understand
active low, but it remains at 3.3 V even after we connect the usb
cable.
Any recommendations as to the best way to figure this out would be
appreciated. So far we double checked that the pins connecting to the
booz board (power and ground) are working properly, that 3.3 V is being
sent to the USB VBus pin and the USB Select pin is always at 3.3 V
Thank you for your help,
Sincerely
Mohammed
Get a great deal on Windows 7 and see how it works the way you
want. See
the Windows 7 offers now.
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Get Windows 7 for only $39.99-CDN College or University students only. This offer ends Jan 3-upgrade now!
|