Re: [Paparazzi-devel] messages downlink rate

[Pascal Brisset]

Elden Crom wrote:
> 1) I added a new message to  .../paparazzi3/conf/messages.xml 
A "make" command from the paparazzi3/ directory is required after each 
modification of the code/configuration which is not directly related to 
the aircraft configuration.

> 2) The simulation says the DOWNLINK rate is 455 byte/s.  Will this be OK on the 
> real plane with xbee, so long as nb_overn stays at 0?
>  
>   
The default baudrate of the Xbee is 9600, so more than 900 bytes/s.

--Pascal