Re: [Paparazzi-devel] re:upload error

[Bernard Davison]

Try doing the following to check that you have the USB device connected before attempting to upload.

open a terminal window

type 

sudo tail -f /var/log/messages &

Then plug in Tiny and power it up.

If it connects to the Vm then you'll see some messages come up which will tell you were it's connected to.

If not then you'll need to connect it via the VM software. i.e. in Parallels I need to select Devices --> USB --> <USB device name>

What VM software are you using?

Cheers,

Bernie.

On 25/11/2009, at 10:37 AM, address@hidden wrote:

wait, you said you are running in a VM correct?  If so you have to add the USB device to the list in VMware.  I no longer use VMware so I couldnt tell you how to do it, just that I remember having to do it.

-------- Original Message --------
Subject: [Paparazzi-devel] re:upload error
From: Jesus Martin Sanchez <address@hidden>
Date: Tue, November 24, 2009 12:25 pm
To: address@hidden

Sorry, The last one was wrong....
  The actual message it´s that one.
  No USB device
Make[1]:***[upload] Error 1
make[1]: Leaving directory /usr/share/paparazzi/sw/

airborne
make: ***[ap.upload]

I´ve done what akochevar said to me, but that the new error...
Thanks
Jesús

---

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel