Re: [Paparazzi-devel] difficulty installing u-center with wine

[Chris Gough]

Thanks Mark,

yes I tried that, but it also doesn't work - there is no such thing as /dev/ttyUSB0 on my machine. When I plug in the device I get a new /dev/ttyACM0.

Chris Gough

On Wed, Nov 25, 2009 at 12:17 AM, <address@hidden> wrote:

Chris,

According to the Wiki (http://paparazzi.enac.fr/wiki/GPS), you have to "set up com1 as /dev/ttyUSB0 See Info on wine for "dosdevices" setup."

Did you do that?

---

From: paparazzi-devel-bounces+mark.griffin=itu.int@nongnu.org [mailto:paparazzi-devel-bounces+mark.griffin=itu.int@nongnu.org] On Behalf Of Chris Gough
Sent: Tuesday, 24 November 2009 12:01 PM
To: address@hidden
Subject: [Paparazzi-devel] difficulty installing u-center with wine

Hi, I need to reconfigure my GPS but I am unable to install u-center (v5.08) on Linux (Debaan lenny) using Wine.

The error I get is during "Execute: DPInst.exe", after clicking through the "Device Driver Installation Wizard" screen, I get "Cannot complete device driver installation wizard; driver name: u-blox AG (ubloxusb) Ports (09/12/2008 1.2.0.1); status: install failed ". I've tried it with and without my TWOG+GPS plugged into the USB (same result)

I think Wine might be OK because Motorcalc works fine under it.

I think I flashed my TWOG (+GPS :) with the tunnel OK, when I power it up then plug it in /var/log/messages has something like this:

Nov 24 21:44:12 dev-support-lappy kernel: [275135.220098] usb 1-1: new full speed USB device using uhci_hcd and address 8
Nov 24 21:44:12 dev-support-lappy kernel: [275135.387549] usb 1-1: configuration #1 chosen from 1 choice
Nov 24 21:44:12 dev-support-lappy kernel: [275135.396113] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
Nov 24 21:44:12 dev-support-lappy kernel: [275135.399467] usb 1-1: New USB device found, idVendor=7070, idProduct=1235
Nov 24 21:44:12 dev-support-lappy kernel: [275135.399477] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 24 21:44:12 dev-support-lappy kernel: [275135.399485] usb 1-1: Product: USBSerial
Nov 24 21:44:12 dev-support-lappy kernel: [275135.399491] usb 1-1: Manufacturer: LPCUSB
Nov 24 21:44:13 dev-support-lappy kernel: [275135.399498] usb 1-1: SerialNumber: 12345678

When I:
dev-support-lappy:/home/daims# ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0 2009-11-24 21:44 /dev/ttyACM0

and:
dev-support-lappy:/home/daims# groups daims
daims dialout cdrom floppy audio www-data video plugdev netdev powerdev

so that looks fine. if I "cat /dev/ttyACM0" I get characters on stdout (non-assci). I don't know why it uses dialout group for that device, might have something to do with me installing wvdial a little while ago.

Oh yeah, I've also tried various combinations of linking com1 and com2 to /dev/ttyS0 and /dev/ttyACM0 in ~/.wine/dosdevices.

What should I try next? please help.

Chris Gough

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel