RE: [Paparazzi-devel] Re: Paparazzi-devel Digest, Vol 68, Issue 42

[gisela.noci]

NOTE : the Conrad sensor is a basic Doppler MOVEMENT detector, not a ranging
device. It will not give range, it will only indicate that movement was
detected in the irradiated area.

Joe

-----Original Message-----
From: address@hidden
[mailto:address@hidden
] On Behalf Of address@hidden
Sent: Sunday, November 22, 2009 8:11 PM
To: address@hidden
Subject: [Paparazzi-devel] Re: Paparazzi-devel Digest, Vol 68, Issue 42

@ From: Chris <address@hidden>
If you are interested, i could pass you a schematic/idea of getting
16 distance zones from a cheap ir receiver. Example, using a 40khz
receiver, modulate the IR TX diode from 40khz to 45khz, and depending
on the frequence you get you´r id back, then the distance is in the
region. It´s not so precise, but could be a aid. Getting 30mt distance
measurement is not a problem.  I use it for forward looking with a IR diode
pulsed at 2A for 1 microsecond as obstacle detecting, and for
getting the right angle and position for landing using narrow IR TX
that send out the descend error from ground.

The sensor i use is produced by hygrosense(r) and distributed by
conrad. http://www.conrad.de/goto.php?artikel=502374
On the uk flag, there is the english datasheet.
I have selected this, because of my battery concept.
The sensor need to be amplified. Annother module:
http://www.conrad.de/goto.php?artikel=502667
-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel