Re: [Paparazzi-devel] 3 state switch on any R/C controller

paparazzi-devel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] 3 state switch on any R/C controller

From:	Gareth Roberts
Subject:	Re: [Paparazzi-devel] 3 state switch on any R/C controller
Date:	Sat, 30 May 2009 22:37:02 +0100

If your transmitter allows, use your current switch, and set a massive D/R rate on yaw only. That way, you can use your current switch for man/auto, and the D/R switch for auto1/2.

If you are still interested, if you email me personally I can send you a link to download that video.

Hope this helps!

Gareth R

----- Original message -----

what if solder a potentimeter and try to adjust auto1 position?

30.05.09, 22:24, "? flying pig" <address@hidden>:

> Hi there

> I did that, and the results i get is like on/off only, it is strange.

> I also try this experiment on the Futaba Skysport 4, some how it gives 3 state, but the neutral react very slow, and when i put it in paparazzi, it tend to shut of the rc link.

> Thanks anyway

> Chen

> > From: address@hidden

> > To: address@hidden

> > Subject: Re: [Paparazzi-devel] 3 state switch on any R/C controller

> > Date: Sat, 30 May 2009 21:08:07 +0400

> >

> > Hello

> > try to add two resistor divider between switch inputs. this would give central position.

> >

> > 30.05.09, 17:04, "? flying pig" <address@hidden>:

> >

> > > Hi there

> > >

> > > I have recently got one of the remote controll from someone, it is 4 channel 40Mhz, the brand is REELY (from Conrad in Germany i believe). I was thinking using for paparazzi.

> > >

> > > I have tap in to the R/C receiver, which was ok (just read the chip number without any measurement), however, I have some didfficulty in making 3 state switch.

> > >

> > > I cut the yaw channel (4th channel), and rewire to 3 state s

> witch (on/off/on), however, when i use it, it seen like only have on/off function.

> > >

> > > Does anyone has done the similar thing about cutting one channel from the controller to make it into the 3 state switch? can anyone advice?

> > >

> > > Regards

> > >

> > > &nbs

> p; Chen

> > > 5 GB ???? ????????????????? ? ???? Windows Live Hotmail

> > --