paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] 3 state switch on any R/C controller


From: 郭 flying pig
Subject: RE: [Paparazzi-devel] 3 state switch on any R/C controller
Date: Sat, 30 May 2009 21:30:51 +0000

Hi there
 
  That is actually a good idea, i will try that as soon as i get the part from shop, next week
 
 
Thanks
 
                                                                                            Chen
 
> From: address@hidden
> To: address@hidden
> Subject: Re: [Paparazzi-devel] 3 state switch on any R/C controller
> Date: Sun, 31 May 2009 01:25:51 +0400
>
> what if solder a potentimeter and try to adjust auto1 position?
>
> 30.05.09, 22:24, "? flying pig" <address@hidden>:
>
> > Hi there
> >  
> >   I did that, and the results i get is like on/off only, it is strange.
> >  
> >   I also try this experiment on the Futaba Skysport 4, some how it gives 3 state, but the neutral react very slow, and when i put it in paparazzi, it tend to shut of the rc link.
> >  
> >  
> > Thanks anyway
> >  
> >                                                                                                                                                                      
> >    Chen
> >  
> > > From: address@hidden
> > > To: address@hidden
> > > Subject: Re: [Paparazzi-devel] 3 state switch on any R/C controller
> > > Date: Sat, 30 May 2009 21:08:07 +0400
> > >
> > > Hello
> > > try to add two resistor divider between switch inputs. this would give central position.
> > >
> > > 30.05.09, 17:04, "? flying pig" <address@hidden>:
> > >
> > > > Hi there
> > > >  
> > > >   I have recently got one of the remote controll from someone, it is 4 channel 40Mhz, the brand is REELY (from Conrad in Germany i believe). I was thinking using for paparazzi.
> > > >  
> > > >   I have tap in to the R/C receiver, which was ok (just read the chip number without any measurement), however, I have some didfficulty in making 3 state switch.
> > > >  
> > > >  
> > > >   I cut the yaw channel (4th channel), and rewire to 3 state s
> > witch (on/off/on), however, when i use it, it seen like only have on/off function.
> > > >  
> > > >  
> > > >   Does anyone has done the similar thing about cutting one channel from the controller to make it into the 3 state switch?  can anyone advice?
> > > >  
> > > >  
> > > >  
> > > > Regards
> > > >  
> > > >                                                                                                  &nbs
> > p;   Chen
> > > > 5 GB ???? ????????????????? ? ???? Windows Live Hotmail 
> > > --
> > > Есть ли письма? Знает мобильная Яндекс.Почта http://mobile.yandex.ru/online
> > >
> > >
> > > _______________________________________________
> > > Paparazzi-devel mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > 5 GB ???? ????????o??]???? ? ??? Windows Live Hotmail 
> --
> Яндекс.Почта. Чище не бывает http://mail.yandex.ru/nospam
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel


用部落格分享照片、影音、趣味小工具和最�矍��危��M情秀出你自己 ― Windows Live Spaces

reply via email to

[Prev in Thread] Current Thread [Next in Thread]