Re: [Paparazzi-devel] UART1 stopped working

[David Carlson]

I've also had this happen to one LPC.  They are not necessarily easy to 
replace though.  Very small pitch.  Make sure you have the skills to do 
it before you attempt it.

Buzz

PS, sorry Cedric.

Daniel Morgan wrote:
> It could also be that you fried your uart..They are pretty sensitive 
> and i have actually had a few go out on me lately. Just need to 
> replace the LPC
>
> On Wed, May 27, 2009 at 8:35 AM, Cédric Marzer <address@hidden 
> <mailto:address@hidden>> wrote:
>
>     I was just trying to answer Andrea's problem, but my bloody email
>     client
>     doesn't put the > automaticaly.
>     Anyway I think Andrea's tunnel is working with USB but not with UART1.
>     I also think it is an airframe file problem with the wrong
>     settings for the
>     modem.
>
>     >Cédric,
>
>     >If tunnel is allowing you to talk to the GPS, then both of your UARTs
>     >are working fine.  Tunnel pretty much takes what it heres on
>     UART1 and
>     >repeats it on UART0, and vice versa.
>
>     >I would look in your airframe file.  Make sure you have configured to
>     >use the proper serial ports.  For Tiny 2.11, GPS should use UART0 and
>     >telemetry should use UART1.
>
>     >Buzz
>
>
>
>
>     _______________________________________________
>     Paparazzi-devel mailing list
>     address@hidden <mailto:address@hidden>
>     http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>