RE: [Paparazzi-devel] ADC_7 channel on the Tiny 2.11

[郭 flying pig]

Dear Pascal
 
  That rings the bell, I set all the flag for different ADC when i try it, but i forgot to set the ADC_7 :P
 
  Now, everything works fine, thanks for your help.
 
 
Thanks
 
                                                                      Chen
 
> Date: Wed, 6 May 2009 23:20:29 +0200
> From: address@hidden
> To: address@hidden
> Subject: Re: [Paparazzi-devel] ADC_7 channel on the Tiny 2.11
>
> Hi,
>
> did you set the corresponding flag in the makefile section of the
> airframe file ?
>
> ap.CFLAGS += -DUSE_ADC_7
>
> --Pascal
>
> 郭 flying pig wrote:
> > Hi all
> >
> >
> > I have try to connet gyro to the ADC_7 (the one on the USB) for gyro,
> > I supply it with 5V from the servo port, however, for some reason, it
> > didn't work. and strangely, when i connect back to ADC3, it is working
> > again.
> >
> >
> > I was wondering, does any one know why? from the circuit itself, ADC_3
> > and ADC_7 has no different???
> >
> >
> >
> > Thanks
> >
> >
> > Chen
> >
> > ------------------------------------------------------------------------
> > 聰明搜尋和瀏覽網路的免費工具列 — Windows Live 工具列
> > <http://download.live.com/toolbar>
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

---

聰明搜尋和瀏覽網路的免費工具列 — Windows Live 工具列