Re: [Paparazzi-devel] Apologies re: Last Post

[David Conger]

Stephen,

have you tried reversing Ch3 in the transmitter? The values for MOTOR? The ESC internal programming (some can be reversed inside the ESC)?

Permutations: 

 1. Tx reversing

 2. programming the ESC reversing

 3. MOTOR value reversing

How does that work out? 8 different permutations? Just need to try them until AUTO2 and the Rc equipment match. 

-Regards,

David 

On Apr 21, 2009, at 9:08 PM, Stephen L Hulme wrote:

My sincerest apologies for time wasting re: video strip switch information/help request.

 

I forgot to plug the video receiver into the laptop. Of course it wouldn't work .It does now.

 

So I have one request only:as I noted in my previous post:  

 

 

 I reversed the funjet1.xml command section as follows to get the surfaces moving in the right direction from the RC transmitter as set out here:

 

<!-- commands section -->
  <servos>
    <servo name="MOTOR"                 no="0" min="2000" neutral="2000" max="1000"/>
    <servo name="AILEVON_LEFT"   no="2" min="1880" neutral="1500" max="1130"/>
    <servo name="AILEVON_RIGHT" no="6" min="1170" neutral="1515" max="1980"/>
  </servos>

 

Unfortunately the throttle strip setting always reads the reverse of the RC transmitter throttle stick position and the actions of the motor.

 

Motor off stick towards me -100% reading. and vice versa.

 

Can I change this?

 

 

Stephen 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel