[Paparazzi-devel] flight plan's block change through GCS buttons problem SOLVED

[chris]

Hi.
I talked with a friend on the IRC and he found what was wrong.
There were 3 lines on the airframe file that shouldn't be there.
<section name="DATALINK" prefix="DATALINK_">
  <define name="DEVICE_TYPE" value="XBEE"/>
  <define name="DEVICE_ADDRESS" value="...."/>
</section>
I commented those lines and the GCS started to talk to the modems.
With those lines i could receive but not transmit from the GCS, weird...
Chris