paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] x bee pro


From: עידן מנדלסון
Subject: Re: [Paparazzi-devel] x bee pro
Date: Thu, 2 Apr 2009 07:52:23 +0300

 hello everyone thanks for all the help with my problem at the end it was  the xml airframe file
i was able to fix it and now i have flawless connection with two air crafts.
thanks again for all your help
eidan mendelsohn
בתאריך 30 מרץ 2009 20:14, מאת עידן מנדלסון <address@hidden>:
xbee transport
2009/3/30 Alston Pike <address@hidden>
Are you using the pprz transport or the xbee transport?

Alston Pike
BSME 2009
The University of Alabama
address@hidden
(706) 594-2812


2009/3/30 עידן מנדלסון <address@hidden>

 thanks for answering my call, I'm using the 2.4 version, and i don't have any problems in peer to peer communication, i appreciate the try, if same one else can assist i will most grateful. 

2009/3/30, G Roberts <address@hidden>:
Are they the 868Mhz versions?
I had a similiar problem with just one UAV, and after a revealing chat with
Digicom tech support found that they have a maximum duty cycle of 10%, and so
can't support streaming data continuously like paparazzi does.
I've gone back to my 2.4Ghz ones temporarily, you can also try adjusting the max
power to the minimum in X-CTU which should give you more time.
Hope this helps, and is related to your problem
G


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]