Re: [Paparazzi-devel] Hi

[Matthew Currie]

Mohammad,

  My Tiny13 1.1 was doing similar and I discovered the board was resetting 
itself due to a regulator problem. Can you confirm that it is not resetting? 
The LEDs will be your first clue.


--
Matthew Currie
Mobile: 250-755-6998
Sent from a BlackBerry device    

-----Original Message-----
From: Mohammad Ali Haji Pour <address@hidden>

Date: Sat, 10 May 2008 06:48:59 
To:address@hidden
Subject: [Paparazzi-devel] Hi


Hi all,

1. As mentioned in the manual I took off my plane in AUTO1 and then switched to 
AUTO2. The first block was to go from wp1 to wp2, but the plane ran away.

2. In AUTO2 suddenly the plane lost all the control, but fortunately I could 
get it back by MANUAL. I double checked on the ground and realized that 
sometimes when I roll the plane by hand the ailerons halt in on direction and 
stay there for at least 15 seconds.

I appreciate it if someone can give me a hint.

Best Regards,

Mohammad


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel