Hi guys,
I get the following on a new Tiny 2.1 board I just assembled:
arm-elf-objcopy -O ihex bl_ram.elf bl_ram.hex
arm-elf-objdump -x --syms bl_ram.elf > bl_ram.dmp
lpc21isp -control sw/airborne/arm7/test/bootloader/bl.hex /dev/ttyUSB0 38400 12000
lpc21isp version 1.27
File sw/airborne/arm7/test/bootloader/bl.hex:
loaded...
converted to binary format...
image size : 7304
ioctl get failed
ioctl set ok, status = 4001ACE6
ioctl get failed
ioctl get failed
ioctl set ok, status = 186A4
ioctl get failed
ioctl get failed
ioctl set ok, status = 186A0
ioctl get failed
Synchronizing.ioctl get
failed
ioctl set ok, status = 4003189E
ioctl get failed
ioctl get failed
ioctl set ok, status = 186A4
ioctl get failed
ioctl get failed
ioctl set ok, status = 186A0
ioctl get failed
.ioctl get failed
ioctl set ok, status = 7
ioctl get failed
ioctl get failed
ioctl set ok, status = 186A4
And it goes on an on, until it stops with an error. Oscillations are OK on the LPC.
All solder joints look good!
Any ideas?
-Thanks,
Uttam