RE: [Paparazzi-devel] Tiny1

[Yves Touchette]

Ok,

Here's two things you can do to help you:
In eagle with the .brd file open:

-Type 'show R5' in the command box (just above the board display). This will highlight the R5 component.
- If you want to know the value of a specific component, then type 'info' then click on the component's origin. This will open up a window that will show you the details about that component including it's value

Also, limiting the layers being displayed, it's not that hard to figure out the value of the components. To see the top components and there values,  click view->display/hide layers click on none, then select tPlace and remove tOrigins and tNames. You should see the outline of the top components and their values.

Hope this helps!

-yvest

---

> Date: Sun, 16 Mar 2008 21:39:51 +0400
> From: address@hidden
> Subject: Re: RE: [Paparazzi-devel] Tiny1
> To: address@hidden
>
> Hi Yvest,
>
> I think you have misunderstood me. Sorry that my previous email is not clear. I am using tiny13 1.1 and I do have all the required components. What I meant was that the layout that I can get from EAGLE ".brd" file has the component values and it shows where to attach each component on the PCB. But my problem is that the values are not distinguishable since they are too close to each other and I cannot change anything in the file which I think is because of the free version of EAGLE. Now I thought someone may have a clear layout of Tiny13 1.1 with all the values on it that can help me assemble the board.
>
> Regards,
>
> Mohammad
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

---

Snap and Share.  From your phone to your space.  Post your pics here.